Gridgen
From CFD-Wiki
(Difference between revisions)
(cleaned it up a bit and removed a few too commercial wordings) |
m |
||
| (9 intermediate revisions not shown) | |||
| Line 1: | Line 1: | ||
| - | Gridgen is a commercial mesh generator developed and | + | Gridgen is a commercial mesh generator developed, distributed, and supported by Pointwise, Inc. in Fort Worth, Texas, USA. Development of Gridgen began in 1984 and commercialization began in 1994. |
| - | Gridgen | + | The last production release of Gridgen was Version 15.18, released in August 2012. |
| - | #Structured, | + | Gridgen's end-of-life went into effect in September 2016. |
| - | #Interfaces | + | |
| - | # | + | |
| - | # | + | == Supported Mesh Types == |
| + | |||
| + | #Structured (mapped quad and hex) | ||
| + | #Unstructured (Delaunay tri and tet) | ||
| + | #Hybrid (prism-tet, hex-pyramid-tet, etc.) | ||
| + | |||
| + | == Geometry Modeling == | ||
| + | |||
| + | Geometry import formats include the following. | ||
| + | |||
| + | #IGES | ||
| + | #STL | ||
| + | #PLOT3D | ||
| + | #Points | ||
| + | |||
| + | Geometry export includes the following formats. | ||
| + | |||
| + | #IGES | ||
| + | #Gridgen Native | ||
| + | |||
| + | Geometry that can be created in Gridgen includes the following entity types. | ||
| + | |||
| + | #solid model | ||
| + | #quilt | ||
| + | #trimmed surface | ||
| + | #Coon's patch | ||
| + | #polyconic surface | ||
| + | #surface of revolution | ||
| + | #sweep surface | ||
| + | #ruled surface | ||
| + | #circle | ||
| + | #conic | ||
| + | #curve (Catmull-Rom and Akima) | ||
| + | #line | ||
| + | #point | ||
| + | #note | ||
| + | |||
| + | == CFD Solver Interfaces == | ||
| + | |||
| + | Gridgen can export meshes and boundary conditions in the following native formats. | ||
| + | |||
| + | #ADPAC | ||
| + | #CFDSHIP-IOWA | ||
| + | #CFD++ | ||
| + | #CFX-4 and CFX-5 | ||
| + | #CGNS | ||
| + | #CNSFV | ||
| + | #COBALT | ||
| + | #COMO | ||
| + | #CRUNCH | ||
| + | #DTNS | ||
| + | #EXODUS II | ||
| + | #FALCON | ||
| + | #FANS | ||
| + | #FDNS/UNIC | ||
| + | #FLUENT V4 and FLUENT | ||
| + | #FrontFlow | ||
| + | #GASP | ||
| + | #GUST | ||
| + | #INCA V2 and V3 | ||
| + | #NCC | ||
| + | #NPARC | ||
| + | #NSAERO | ||
| + | #OVERFLOW | ||
| + | #PHOENICS | ||
| + | #SCRYU and SCRYU/Tetra | ||
| + | #Splitflow | ||
| + | #STAR-CCM+ | ||
| + | #STAR-CD | ||
| + | #TACOMA | ||
| + | #TASCflow | ||
| + | #TEAM | ||
| + | #TETREX | ||
| + | #VSAERO and VSAEROhybrid | ||
| + | #WIND and WIND-US | ||
| + | |||
| + | Grid files (without boundary conditions) may also be written in the following formats. | ||
| + | |||
| + | #PLOT3D | ||
| + | #PATRAN | ||
| + | #NASTRAN | ||
| + | #UCD | ||
| + | #VRML 1.0 | ||
| + | #STL | ||
| + | #XPATCH | ||
| + | #IGES | ||
| + | |||
| + | == Hardware Support == | ||
| + | |||
| + | Gridgen runs on the following platforms. | ||
| + | |||
| + | # Windows on Intel and AMD | ||
| + | # Linux on Intel and AMD) | ||
| + | # Mac | ||
| + | # HP-UX 11.11 on PA-RISC | ||
| + | # SGI IRIX | ||
| + | # Sun Solaris | ||
| + | |||
| + | == Scripting == | ||
| + | |||
| + | Gridgen has a Tcl-based scripting language called GridgenGlyph that can automate CFD meshing. | ||
==External links== | ==External links== | ||
| - | [http://www. | + | [http://www.gridgen.com/ Gridgen's web site] |
Latest revision as of 13:19, 13 June 2018
Gridgen is a commercial mesh generator developed, distributed, and supported by Pointwise, Inc. in Fort Worth, Texas, USA. Development of Gridgen began in 1984 and commercialization began in 1994.
The last production release of Gridgen was Version 15.18, released in August 2012.
Gridgen's end-of-life went into effect in September 2016.
Contents |
Supported Mesh Types
- Structured (mapped quad and hex)
- Unstructured (Delaunay tri and tet)
- Hybrid (prism-tet, hex-pyramid-tet, etc.)
Geometry Modeling
Geometry import formats include the following.
- IGES
- STL
- PLOT3D
- Points
Geometry export includes the following formats.
- IGES
- Gridgen Native
Geometry that can be created in Gridgen includes the following entity types.
- solid model
- quilt
- trimmed surface
- Coon's patch
- polyconic surface
- surface of revolution
- sweep surface
- ruled surface
- circle
- conic
- curve (Catmull-Rom and Akima)
- line
- point
- note
CFD Solver Interfaces
Gridgen can export meshes and boundary conditions in the following native formats.
- ADPAC
- CFDSHIP-IOWA
- CFD++
- CFX-4 and CFX-5
- CGNS
- CNSFV
- COBALT
- COMO
- CRUNCH
- DTNS
- EXODUS II
- FALCON
- FANS
- FDNS/UNIC
- FLUENT V4 and FLUENT
- FrontFlow
- GASP
- GUST
- INCA V2 and V3
- NCC
- NPARC
- NSAERO
- OVERFLOW
- PHOENICS
- SCRYU and SCRYU/Tetra
- Splitflow
- STAR-CCM+
- STAR-CD
- TACOMA
- TASCflow
- TEAM
- TETREX
- VSAERO and VSAEROhybrid
- WIND and WIND-US
Grid files (without boundary conditions) may also be written in the following formats.
- PLOT3D
- PATRAN
- NASTRAN
- UCD
- VRML 1.0
- STL
- XPATCH
- IGES
Hardware Support
Gridgen runs on the following platforms.
- Windows on Intel and AMD
- Linux on Intel and AMD)
- Mac
- HP-UX 11.11 on PA-RISC
- SGI IRIX
- Sun Solaris
Scripting
Gridgen has a Tcl-based scripting language called GridgenGlyph that can automate CFD meshing.
