Gauss-Seidel method

From CFD-Wiki

(Difference between revisions)

Revision as of 00:05, 3 January 2012

The Gauss-Seidel method is a technique used to solve a linear system of equations. The method is named after the German mathematician Carl Friedrich Gauss and Philipp Ludwig von Seidel. The method is similar to the Jacobi method and in the same way strict or irreducible diagonal dominance of the system is sufficient to ensure convergence, meaning the method will work.

We seek the solution to a set of linear equations:

$A \phi = b$

In matrix terms, the the Gauss-Seidel iteration can be expressed as

$\phi^{(k+1)} = \left( {D - L} \right)^{ - 1} \left( {U\phi^{(k)} + b} \right),$

where $A=D-L-U$ and $D$ , $L$ , and $U$ represent the diagonal, lower triangular, and upper triangular parts of the coefficient matrix $A$ . $k$ is the iteration count. This matrix expression is mainly of academic interest, and is not used to program the method. Rather, an element-based approach is used:

$\phi^{(k+1)}_i = \frac{1}{a_{ii}} \left(b_i - \sum_{j<i}a_{ij}\phi^{(k+1)}_j-\sum_{j>i}a_{ij}\phi^{(k)}_j\right),\, i=1,2,\ldots,n.$

Note that the computation of $\phi^{(k+1)}_i$ uses only those elements of $\phi^{(k+1)}$ that have already been computed and only those elements of $\phi^{(k)}$ that have yet to be advanced to iteration $k+1$ . This means that no additional storage is required, and the computation can be done in place ( $\phi^{(k+1)}$ replaces $\phi^{(k)}$ ). While this might seem like a rather minor concern, for large systems it is unlikely that every iteration can be stored. Thus, unlike the Jacobi method, we do not have to do any vector copying should we wish to use only one storage vector. The iteration is generally continued until the changes made by an iteration are below some tolerance.

Algorithm

Choose an initial guess $\phi^{0}$

for k := 1 step 1 until convergence do

for i := 1 step until n do

$\sigma = 0$

for j := 1 step until i-1 do

$\sigma = \sigma + a_{ij} \phi_j^{(k)}$

end (j-loop)

for j := i+1 step until n do

$\sigma = \sigma + a_{ij} \phi_j^{(k-1)}$

end (j-loop)

$\phi_i^{(k)} = {{\left( {b_i - \sigma } \right)} \over {a_{ii} }}$

end (i-loop)

check if convergence is reached

end (k-loop)

Convergence

The method will always converge if the matrix A is strictly or irreducibly diagonally dominant. Strict row diagonal dominance means that for each row, the absolute value of the diagonal term is greater than the sum of absolute values of other terms:

$\left | a_{ii} \right | > \sum_{i \ne j} {\left | a_{ij} \right |}$

The Gauss-Seidel method sometimes converges even if this condition is not satisfied. It is necessary, however, that the diagonal terms in the matrix are greater (in magnitude) than the other terms.

Example Calculation

In some cases, we need not even explicitly represent the matrix we are solving. Consider the simple heat equation problem

$\nabla^2 T(x) = 0,\ x\in [0,1]$

subject to the boundary conditions $T(0)=0$ and $T(1)=1$ . The exact solution to this problem is $T(x)=x$ . The standard second-order finite difference discretization is

$T_{i-1}-2T_i+T_{i+1} = 0,$

where $T_i$ is the (discrete) solution available at uniformly spaced nodes. In matrix terms, this can be written as

$\left[ \begin{matrix} {1 } & {0 } & {0 } & \cdot & \cdot & { 0 } \\ {1 } & {-2 } & {1 } & { } & { } & \cdot \\ { 0 } & {1 } & {-2 } & { 1 } & { } & \cdot \\ { } & { } & \cdot & \cdot & \cdot & \cdot \\ { } & { } & { } & {1 } & {-2 } & {1 }\\ { 0 } & \cdot & \cdot & { 0 } & { 0 } & {1 }\\ \end{matrix} \right] \left[ \begin{matrix} {T_1 } \\ {T_2 } \\ {T_3 } \\ \cdot \\ {T_{n-1} } \\ {T_n } \\ \end{matrix} \right] = \left[ \begin{matrix} {0} \\ {0} \\ {0} \\ \cdot \\ {0} \\ {1} \\ \end{matrix} \right].$

However, for any given $T_i$ for $1 < i < n$ , we can write

$T_i = \frac{1}{2}(T_{i-1}+T_{i+1}).$

Then, stepping through the solution vector from $i=2$ to $i=n-1$ , we can compute the next iterate from the two surrounding values. Note that (in this scheme), $T_{i+1}$ is from the previous iteration, while $T_{i-1}$ is from the current iteration:

$T_i^{k+1} = \frac{1}{2}(T_{i-1}^{k+1}+T_{i+1}^k).$

The following table gives the results of 10 iterations with 5 nodes (3 interior and 2 boundary) as well as $L_2$ norm error.

Gauss-Seidel Solution (i=2,3,4)
Iteration	$T_1$	$T_2$	$T_3$	$T_4$	$T_5$	$L_2$ error
0	0.0000E+00	0.0000E+00	0.0000E+00	0.0000E+00	1.0000E+00	1.0000E+00
1	0.0000E+00	0.0000E+00	0.0000E+00	5.0000E-01	1.0000E+00	6.1237E-01
2	0.0000E+00	0.0000E+00	2.5000E-01	6.2500E-01	1.0000E+00	3.7500E-01
3	0.0000E+00	1.2500E-01	3.7500E-01	6.8750E-01	1.0000E+00	1.8750E-01
4	0.0000E+00	1.8750E-01	4.3750E-01	7.1875E-01	1.0000E+00	9.3750E-02
5	0.0000E+00	2.1875E-01	4.6875E-01	7.3438E-01	1.0000E+00	4.6875E-02
6	0.0000E+00	2.3438E-01	4.8438E-01	7.4219E-01	1.0000E+00	2.3438E-02
7	0.0000E+00	2.4219E-01	4.9219E-01	7.4609E-01	1.0000E+00	1.1719E-02
8	0.0000E+00	2.4609E-01	4.9609E-01	7.4805E-01	1.0000E+00	5.8594E-03
9	0.0000E+00	2.4805E-01	4.9805E-01	7.4902E-01	1.0000E+00	2.9297E-03
10	0.0000E+00	2.4902E-01	4.9902E-01	7.4951E-01	1.0000E+00	1.4648E-03

In this situation, the direction that we "sweep" is important - if we step though the solution vector in the opposite direction, the solution moves away from the chosen initial condition (zero everywhere in the interior) more quickly. The iteration is defined by

$T_i^{k+1} = \frac{1}{2}(T_{i-1}^{k}+T_{i+1}^{k+1}),$

and this gives us (slightly) faster convergence, as shown in the table below.

Gauss-Seidel Solution (i=4,3,2)
Iteration	$T_1$	$T_2$	$T_3$	$T_4$	$T_5$	$L_2$ error
0	0.0000E+00	0.0000E+00	0.0000E+00	0.0000E+00	1.0000E+00	1.0000E+00
1	0.0000E+00	1.2500E-01	2.5000E-01	5.0000E-01	1.0000E+00	3.7500E-01
2	0.0000E+00	1.8750E-01	3.7500E-01	6.2500E-01	1.0000E+00	1.8750E-01
3	0.0000E+00	2.1875E-01	4.3750E-01	6.8750E-01	1.0000E+00	9.3750E-02
4	0.0000E+00	2.3438E-01	4.6875E-01	7.1875E-01	1.0000E+00	4.6875E-02
5	0.0000E+00	2.4219E-01	4.8438E-01	7.3438E-01	1.0000E+00	2.3438E-02
6	0.0000E+00	2.4609E-01	4.9219E-01	7.4219E-01	1.0000E+00	1.1719E-02
7	0.0000E+00	2.4805E-01	4.9609E-01	7.4609E-01	1.0000E+00	5.8594E-03
8	0.0000E+00	2.4902E-01	4.9805E-01	7.4805E-01	1.0000E+00	2.9297E-03
9	0.0000E+00	2.4951E-01	4.9902E-01	7.4902E-01	1.0000E+00	1.4648E-03
10	0.0000E+00	2.4976E-01	4.9951E-01	7.4951E-01	1.0000E+00	7.3242E-04

For this toy example, there is not large penalty for choosing the wrong sweep direction. For some of the more complicated variants of Gauss-Seidel, there is a substantial penalty - the sweep direction determines (in a vague sense) the direction in which information travels.

External links

reverse lookup

reverse phone lookup cell

@@ Line 297: / Line 297: @@
 *[http://mathworld.wolfram.com/Gauss-SeidelMethod.html Gauss-Seidel from MathWorld]
 *[http://en.wikipedia.org/wiki/Gauss_seidel Gauss-Seidel from Wikipedia]
+[http://www.prlog.org/11289974-phone-number-lookup-verizon-phone-number-reverse-lookup-to-get-information-you-need-quickly.html reverse lookup]
+[http://thetvtopc.com/Reverse_Cell_Phone_Lookup_Number reverse phone lookup cell]

Gauss-Seidel method

From CFD-Wiki

Revision as of 00:05, 3 January 2012

Contents

Algorithm

Convergence

Example Calculation

External links

Views

My wiki

wiki navigation

wiki search

wiki toolbox