Turbulence modeling
From CFD-Wiki
(Difference between revisions)
(Started on an introduction, a lot remains) |
|||
Line 1: | Line 1: | ||
+ | Turbulence modeling is a key issue in most CFD simulations. Virtually all engineering applications are turbulent and hence require a turbulence model. | ||
+ | |||
+ | ==Classes of turbulence models== | ||
+ | |||
+ | *Algebraic models | ||
+ | *Eddy viscosity transport models, one and two equation models | ||
+ | *Non-linear eddy viscosity models and algebraic stress models | ||
+ | *Reynolds stress transport models | ||
+ | *Detached eddy simulations and other hybrid models | ||
+ | *Large eddy simulations | ||
+ | *Direct numerical simulations | ||
+ | |||
# [[Turbulence]] | # [[Turbulence]] | ||
# [[Algebraic turbulence models|Algebraic models]] | # [[Algebraic turbulence models|Algebraic models]] |
Revision as of 22:07, 22 May 2007
Turbulence modeling is a key issue in most CFD simulations. Virtually all engineering applications are turbulent and hence require a turbulence model.
Classes of turbulence models
- Algebraic models
- Eddy viscosity transport models, one and two equation models
- Non-linear eddy viscosity models and algebraic stress models
- Reynolds stress transport models
- Detached eddy simulations and other hybrid models
- Large eddy simulations
- Direct numerical simulations
- Turbulence
- Algebraic models
- One equation models
- Two equation models
- v2-f models
- model
- model
- Reynolds stress model (RSM)
- Large eddy simulation (LES)
- Detached eddy simulation (DES)
- Direct numerical simulation (DNS)
- Turbulence near-wall modeling
- Turbulence free-stream boundary conditions