-
Fluent Webinar "Optimierung von Gas- und Oelbrennern in Bezug auf die Schadstoffemission"
Online Event, March 28, 2006
Online-Seminar - will be in German language
-
Introduction to FLUENT Training
Course, Fluent Inc., Lebanon, United States, March 27, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Decouvrez FLUENT for CATIA V5 a INDao
Paris Nord Villepinte, Paris, France, March 27, 2006
Fluent, leader mondial en dynamique des fluides (CFD),
present sur le stand de Dassault Systemes lors d INDUSTRIE
2006 dans le cadre d IND.ao, presentera en avant-premiere
le produit de la collaboration entre les deux societes :
FLUENT for CATIA V5.
-
Advanced Thermal Modeling Course by Fluent
Course, Fluent Inc., Austin, United States, March 23, 2006
This is a one-day advanced course that deals with advanced
thermal systems and concepts. It includes modeling of
PCBs, IC packages, interface resistances, altitude
effects, radiation, heat pipes, joule heating,
thermoelectric coolers, transformers, cold plates,
baffles, wall effects, and external heaters/coolers.
-
Introduction to FLUENT Training
Course, Fluent Inc., Ann Arbor, United States, March 20, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Advanced Training in FLUENT
Course, Fluent Inc., Lebanon, United States, March 20, 2006
This course is intended for experienced users of FLUENT v6
who are interested in more in-depth instruction on
specific topics. Users may sign up for one or more days of
instruction. Courses will consist of both lecture and
hands-on examples.
-
Introduction to Icepak Training by Fluent
Course, Fluent Inc., Austin, United States, March 20, 2006
New users of Icepak software should register for the three-
day introductory training course.
-
Introduction to Icepak Training by Fluent
Course, Santa Clara, United States, March 20, 2006
New users of Icepak software should register for the three-
day introductory training course.
-
Fluent Webinar "Einsatzmoeglichkeiten und Nutzen von CFD in der Umwelttechnik"
Online Event, March 20, 2006
Online-Seminar - will be in German language
-
Imagine What Building a Better Pump Can Do For You and Your Company
Online Event, March 16, 2006
Join us for a one-hour online event and learn how, by
using computational fluid dynamics (CFD), you can improve
the efficiency of your engineering designs and increase
the overall reliability of your pumps.
-
Introduction to Airpak Training by Fluent
Course, Fluent Inc., Lebanon, United States, March 15, 2006
The training course is a combination of lectures with
discussion and hands-on exercises to introduce the student
to the basics of using Airpak, to familiarize the student
with the user-interface, and also to begin a mutually
beneficial partnership.
-
Fluent laedt ein: FloWizard-Workshop
Workshop, Stuttgart, Germany, March 15, 2006
Rapid Flow Modeling: CFD-Power fuer den Konstruktions-Experten
-
Gridgen Training
Course, 213 South Jennings Ave., Fort Worth, United States, March 14, 2006
The Gridgen Standard Training Course includes three days
covering both basic and advanced Gridgen usage. The most
commonly used GUI commands and efficient tools for making
grids quickly are thoroughly explained. The training
course progresses to more advanced tools and how to work
with difficult topologies and geometry models. Tutorials
will demonstrate the topics discussed and allow attendees
their own practice time with the newly learned tools.
-
Fluent laedt ein: FloWizard-Workshop
Workshop, Duesseldorf, Germany, March 14, 2006
Rapid Flow Modeling: CFD-Power fuer den Konstruktions-Experten
-
Large Eddy Simulation and Associated Techniques
Course, Chaussee de Waterloo 72, B-1640 Rhode-St-Genese, Belgium, March 13, 2006
Large Eddy Simulation (LES) has reached a level of development
and width of application to justify a full course dedicated to this specific topic. .
-
NUMET 2006 Kurzlehrgang: Numerische Methoden zur Berechnung von Stroemungs- und Waermeuebertragungsproblemen
Course, Lehrstuhl fuer Stroemungsmechanik, Universitaet Erlangen, Erlangen, Germany, March 13, 2006
Aufgrund des grossen Interesses am Kurzlehrgang NUMET 2002
und 2004 wird der Lehrstuhl fuer Stroemungsmechanik der
Universitaet Erlangen-Nuernberg auch im Jahr 2006 den CFD-
Kurs in einer aktualisierten Fassung anbieten. Der
Lehrgang
gibt in 21 einstuendigen Vorlesungen, ergaenzt durch
Computerdemonstrationen, eine Einfuehrung in moderne
Techniken der numerischen Stroemungsmechanik.
-
Introduction to FLUENT Training
Course, Fluent Inc., Lebanon, United States, March 13, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Fluent Webinar "Einsatzmoeglichkeiten und Nutzen von CFD in der Gebaeudetechnik"
Online Event, March 13, 2006
Online-Seminar - will be in German language
-
Fluent Webinar "EDV-gestuetzte Brandsimulation mit CFD"
Online Event, March 13, 2006
Online-Seminar - will be in German language
-
Fluent's Advanced Training: Automotive Acoustics Modeling
Course, Fluent Training Center, Ann Arbor, United States, March 9, 2006
This course is for FLUENT users from the automotive
industry who are interested in modeling various automotive
acoustics problems. Attendees must have completed FLUENT
introductory training and it is recommended that they have
at least one year of experience using the software.
-
Advanced Training in FLUENT
Course, Houston, United States, March 8, 2006
This course is intended for experienced users of FLUENT v6
who are interested in more in-depth instruction on
specific topics. Users may sign up for one or more days of
instruction. Courses will consist of both lecture and
hands-on examples.
-
Introduction to Optimization and Multidisciplinary Design
Course, Chaussee de Waterloo 72, B-1640 Rhode-St-Genese, Belgium, March 6, 2006
This course intends to provide the basic concepts and tools for single-discipline
(single-point and multi-point) and multidisciplinary (interaction of fluid-structure,
fluid-acoustics, fluid-heat transfer) optimization.
-
Introduction to FLUENT Training
Course, Houston, United States, March 6, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Introduction to FLUENT Training
Course, Santa Clara, United States, March 6, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Fluent Webinar "Kraftwerkstechnik"
Online Event, March 6, 2006
Online-Seminar - will be in German language
-
Fluent's Advanced Training: Automotive Climate Control System Modeling
Course, Fluent Training Center, Ann Arbor, United States, March 2, 2006
This course is for FLUENT users from the automotive
industry who are interested in modeling various
engineering problems related to ACCS. Attendees must have
completed FLUENT introductory training and it is
recommended that they have at least one year of experience
using the software.
-
Fluent's Advanced Training: Automotive Underhood and Underbody Thermal Modeling
Course, Fluent Training Center, Ann Arbor, United States, March 1, 2006
This course is for FLUENT users in the automotive industry
who are interested in expanding their modeling knowledge
in the areas of underhood and underbody thermal analysis.
Attendees must have completed FLUENT introductory training
and it is recommended that they have at least one year of
experience using the software.
-
Introduction to FLUENT Training
Course, Fluent Inc., Lebanon, United States, February 27, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Introduction to Icepak Training by Fluent
Course, Fluent Inc., Lebanon, United States, February 27, 2006
New users of Icepak software should register for the three-
day introductory training course.
-
Hydrodynamical Instability and Turbulence
Conference, Russia, February 26, 2006
At this conference the following directions are to be
considered:
flows with hydrodynamical instability;
laminar-turbulent transition processes;
chaos and turbulence;
DNS of turbulent flows and CFD;
Applications to microgravity sciences, geophysics,
astrophysics, ecology etc.
In addition, in the framework of the Conference the
Materials & Microgravity Sciences Workshop (MMSW) will be
held for 2-3 days. A special workshop for students is also
planned.
-
Fluent Presents: FloWizard Rapid Modeling Software Live Online Demonstration
Online Event, February 23, 2006
Join us for one of three free online demonstrations for
FloWizard Rapid Modeling Software.
-
CEIViz '06
Conference, Disney Coronado Springs Resort, Orlando, United States, February 22, 2006
CEIViz is a biennial visualization conference that will
feature training seminars, information on new and future
software developments, exhibits by leading hardware
vendors, and presentations on technologies and
applications in VR, FEA, CFD, scientific and other forms
of visualization.
-
Fluent's Fluid Mechanics and CFD Review Course
Course, Fluent Inc., Lebanon, United States, February 22, 2006
This two and a half-day course is intended for those users
who are new to CFD and who need an introduction (or re-
introduction) to fluid mechanics, heat transfer and
computational fluid dynamics.
-
CEIViz '06 - CEI Visualization Conference
User Conference, Disney Coronado Springs Resort, Orlando, United States, February 21, 2006
The first biennial CEIViz '06, a visualization conference specifically designed for engineering and scientific end users.
-
Introduction to Wind Technology
Course, Chaussee de Waterloo 72, B-1640 Rhode-St-Genese, Belgium, February 20, 2006
a state-of-the-art review of
activities in wind technology and to indicate the current research directions.
-
Introduction to Airpak Training by Fluent
Course, Fluent Inc., Lebanon, United States, February 15, 2006
The training course is a combination of lectures with
discussion and hands-on exercises to introduce the student
to the basics of using Airpak, to familiarize the student
with the user-interface, and also to begin a mutually
beneficial partnership.
-
Design, Analysis and Experimental Investigation of High Speed Pumps - RTO-VKI-LS
Course, Chaussee de Waterloo 72, B-1640 Rhode-St-Genese, Belgium, February 13, 2006
High speed pumps are not only important for cryogenic propulsion but also
experience a growing interest for a wide range of more industrial applications.
-
Introduction to FLUENT Training
Course, Fluent Inc., Ann Arbor, United States, February 13, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Introduction to FLUENT Training
Course, Fluent Inc., Lebanon, United States, February 13, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Fluent Presents: FloWizard Rapid Modeling Software Live Online Demonstration
Online Event, February 9, 2006
Join us for one of three free online demonstrations for
FloWizard Rapid Modeling Software.
-
Experiment, Modeling and Simulation of Gas-Surface Interactions for Reactive Flows in Hypersonic Flights - RTO-VKI-LS
Course, Chaussee de Waterloo 72, B-1640 Rhode-St-Genese, Belgium, February 6, 2006
Objectives of the special course are to review the up-to-date experimental
techniques, the theoretical models, as well as the numerical simulation strategies
involved in the treatment of the chemical characters of high temperatures gases.
-
Free OpenFOAM Training and Workshop
Workshop, FSB Zagreb, Ivana Lucica 5, Zagreb, Croatia, January 26, 2006
Faculty of Mechanical Engineering, University of Zagreb,
Croatia and Wikki Ltd. announce a 3-day OpenFOAM Training
and Workshop in Zagreb, Croatia 26-28/January/2006.
-
Introduction to CFD
Course, Chaussee de Waterloo 72, B-1640 Rhode-St-Genese, Belgium, January 23, 2006
This course is intended to provide the basic information required to initiate
research or applications in most of the important domains of computational fluid dynamics.
-
FLUISTCOM Workshop. Experimental techniques for Thermo Acoustics and Structural Vibration in Gas Turbines.
Workshop, University of Twente, Enschede, Netherlands, January 19, 2006
High-level scientific courses and presentations will be
given by lecturers of several European Universities,
Research Organisations and Gas Turbine Industry. The
presentations focus on various approaches to the
experimental techniques relating to the measurement of
turbulent flame thermo acoustical behaviour and to the
structural vibration of the enveloping liner.
-
Gridgen Training
Course, Digital Design LA, Burbank, United States, January 17, 2006
The Gridgen Standard Training Course includes three days
covering both basic and advanced Gridgen usage. The most
commonly used GUI commands and efficient tools for making
grids quickly are thoroughly explained. The training course
progresses to more advanced tools and how to work with
difficult topologies and geometry models. Tutorials will
demonstrate the topics discussed and allow attendees their
own practice time with the newly learned tools.
-
2nd Conference on Chaos and Nonlinear Dynamical Systems
Conference, Aerospace Research Institute, P.O. Box 14665-834, Tehran, I.R., Tehran, Iran, January 17, 2006
Recent developments and techniques of chaos and nonlinear dynamical systems to attend the second conference on chaos and nonlinear dynamical systems (Jan. 17-18 2006, Tehran-Iran).
-
South African Conference on Applied Mechanics (SACAM)
Conference, South Africa, January 16, 2006
A forum for presenting the latest developments in all branches of applied mechanics.
-
44th AIAA Aerospace Sciences Meeting and Exhibit
Conference, Reno Hilton, Reno, United States, January 9, 2006
The Aerospace Sciences Meeting is the
largest of the AIAA technical conferences and one of the preeminent technical gatherings within the
entire spectrum of aerospace activities.
-
Gridgen Glyph Training Seminar
Course, Reno Hilton, Reno, United States, January 8, 2006
This training course will focus on Gridgen Glyph.
-
MAHY2006 - International Conference on Marine Hydrodynamics
Conference, Naval Science and Technological Laboratory (NSTL), DRDO, VISAKHAPATNAM, India, January 5, 2006
Hydrodynamic behavior of marine vehicles, both surface and sub-surface, is an area of prime concern in ship design. The aim of this conference is to bring researchers, academicians, scientists, engineers, naval architects, designers, builders and operators of ships, shipyards and industries on a common platform and exchange views on various aspects regarding state-of-the-art technologies in Marine Hydrodynamics.
-
ICTEA 2006
Conference, Al-Ain, United Arab Emirates, January 3, 2006
Second International Conference on
Thermal Engineering Theory and Application.
-
Introduction to FLUENT
Course, Fluent Inc., Ann Arbor, United States, December 12, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Santa Clara, United States, December 12, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Sarod 2005
Conference, Hyderabad, India, December 9, 2005
SAROD-2005 will be held in Hyderabad during 9th and 10th December 2005. The symposium is aimed at bringing together people working in different aspects of applied aerodynamics and design of aerospace vehicles, from both within and outside the country, to share their insights. The focus is on developments in aerodynamic design and technologies that contribute to these developments as applied to design of aerospace vehicles.
-
Seminar - Fluent Inc. and Optimum Power: Pushing the Boundaries of Engine Simulation
Seminar, 3005 Boardwalk, Ste. 100, Ann Arbor, United States, December 9, 2005
Please join us for this special event to learn of the
updates in
modeling capabilities for our respective software
products.
-
Turbine-99 III
Workshop, Porjus Hydropower Center, Jokkmokk, Sweden, December 8, 2005
Turbine-99 III, the third IAHR Workshop of its kind, aims to determine the state-of-the-art in predicting the flow in hydraulic turbine draft tubes. The third workshop will be held in Porjus, Sweden during December 8-9, 2005. The focus for Turbine-99 III is unsteady calculations and draft tube optimization.
-
Introduction to Airpak
Course, Fluent Inc., Lebanon, United States, December 7, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to FLUENT
Course, Lebanon, United States, December 5, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Austin, United States, December 5, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Intl. Conference on Computational and Experimental Engineering and Sciences (ICCES'05)
Conference, Hyderabad, India, December 1, 2005
The scope of ICCES embraces both classical topics in mechanics, as well as emerging scientific and engineering disciplines, such as: nano-science & technology; NEMS & MEMS; mechanics & chemistry of biosystems; micro-and nano-device modeling; multi-spatial & time-scale and multi-physics phenomena; functional and smart material systems; meshless (MLPG) and novel methods of computational modeling; novel material models such as gradient theories; novel experimental methods, etc.
-
Solving Dynamic Meshing Problems with FLUENT v6
Course, Fluent Inc., Ann Arbor, United States, December 1, 2005
This training course, offered in Fluent's Ann Arbor office, is designed for existing users of FLUENT.
-
Solving Dynamic Meshing Problems with FLUENT v6
Course, Fluent Inc., Ann Arbor, United States, December 1, 2005
This training course, offered in Fluent's Ann Arbor office, is designed for existing users of FLUENT.
-
Fluid Mechanics and CFD Review Course by Fluent
Course, Fluent Inc., Lebanon, United States, November 30, 2005
This two and a half-day course is intended for those users who are new to CFD and who need an introduction (or re- introduction) to fluid mechanics, heat transfer and computational fluid dynamics. The goal is to make you more successful at CFD by having a more thorough knowledge of the underlying physics and numerical techniques in our software.
-
1st Pratical CFD Seminar
Course, ATEC, Quinta do Anjo, Portugal, November 29, 2005
Pratical CFD Seminar in Portugal for Engineers and
Designers
-
Multiphase Flow Workshop
Workshop, Gothenburg, Sweden, November 21, 2005
We invite you to participate in a multiphase flow workshop
November 21-23 hosted by Fluent Sweden. The workshop is
intended for CFD engineers who face multiphase flow in
their daily routine and are looking for efficient ways of
ensuring reliable results. Multiphase flow covers a wide
range of physical phenomena, and the challenge for users
is choosing an appropriate model for a particular
application from the wide selection of possibilities.
-
Numeca User Meeting 2005
User Conference, Le Meridien Hotel, Brussels, Belgium, November 21, 2005
NUMECA User Meeting 2005 will be held at Le Meridien Hotel
in Brussels, Belgium on 21-22 November 2005.
This event will bring together engineers, designers,
scientists, and researchers in CFD analysis of industrial
flows and design optimization of turbomachinery blading
and
for two full days of user presentations, product seminars,
technical discussions and keynote presentations.
The topics of the meeting will include the most exciting
new developments in the NUMECA productline.
-
Italian ANSYS Users' Meeting 2005
User Conference, Villa Caroli-Zanchi, Stezzano (BG), Italy, November 18, 2005
Italian ANSYS, ANSYS CFX and ANSYS ICEM CFD users' meeting
-
Advanced Thermal Modeling Course
Course, Icepak, Santa Clara, United States, November 17, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Second European Workshop on Automatic Differentiation
Workshop, Cranfield UniversityCranfield University (, Shrivenham Campus, Swindon, United Kingdom, November 17, 2005
This is the second in a series of European Workshops providing a forum
for the presentation of theoretical developments in, and applications
of, Automatic Differentiation (AD) and adjoint methods.
-
Computational Fluid Models for Store and Stage Separations Webinar
Online Event, November 17, 2005
This webinar is particularly suited for engineers
interested
in using computational fluid dynamics (CFD) for solving
store separation and stage separation problems. Additional
general computed motions will be discussed as well.
-
Introduction to FLUENT
Course, Lebanon, United States, November 14, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Airpak
Course, Fluent Inc., Lebanon, United States, November 14, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Icepak
Course, Santa Clara, United States, November 14, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Large-scale Numerical Applications to Surface and Subsurface Flow and Transport Processes
Workshop, CRS4, POLARIS, Edificio 1, Pula (Cagliari), Italy, November 10, 2005
The workshop, organized by CRS4 in the frame of the
European Project EUA4X, is aimed at presenting an overview
of large
scale
field scenarios studied within a number of national and
international
projects in the context of surface and subsurface flow
modeling.
The case studies presented covers issues regarding water
cycle processes
and contaminant migration.
-
Fluid-Structure-Interaction with FLUENT and ABAQUS Webinar
Online Event, November 10, 2005
Please join us for this special event, Thursday, November
10, 2005 (2pm EST), to learn about the
finite element program ABAQUS and the fluid dynamics code
FLUENT provide best-in-class simulation solutions in
their respective application areas.
-
Gridgen Training
Course, 213 South Jennings Ave., Fort Worth, United States, November 8, 2005
The Gridgen Standard Training Course includes three days
covering both basic and advanced Gridgen usage. The most
commonly used GUI commands and efficient tools for making
grids quickly are thoroughly explained. The training
course progresses to more advanced tools and how to work
with difficult topologies and geometry models. Tutorials
will demonstrate the topics discussed and allow attendees
their own practice time with the newly learned tools.
-
Introduction to FLUENT
Course, Seattle, United States, November 7, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to FLUENT
Course, Fluent Inc., Ann Arbor, United States, November 7, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Austin, United States, November 7, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
STAR Deutschland Konferenz 2005
Conference, Munich Marriott Hotel, Berliner Str. 93, D-80805, Munich, Germany, November 7, 2005
CD-adapco, celebrating their 25th anniversary within the
CAE business, will be presenting the latest CAE/CFD
technology at the 2nd STAR Deutschland Konferenz on
November 7-8, 2005 at the Munich Marriott Hotel, Munich,
Germany.
-
Introduction to Icepak
Course, Lebanon, United States, November 2, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Introduction to FLUENT
Course, Lebanon, United States, October 31, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Fluent Webinar: Virtual Cooling Audits: A Fundamental Design Service for Data Center Facilities
Online Event, October 27, 2005
Managers of data center facilities, engineers, designers, or
anyone else responsible for data center thermal management
and equipment layout should attend this webinar to learn how
they can benefit from the use of airflow modeling to perform
virtual cooling audits of their facilities using a new
service from Fluent Inc. named CoolSim.
-
Advanced Training in FLUENT
Course, Lebanon, United States, October 24, 2005
This course is intended for experienced users of FLUENT v6 who are interested in more in-depth instruction on specific topics. Users may sign up for one or more days of instruction. Courses will consist of both lecture and hands-on examples.
-
Advanced Thermal Modeling Course
Course, Icepak, Ann Arbor, United States, October 24, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Flight Experiments for Hypersonic Vehicle Developmend - RTO Lecture Series
Course, Chaussee de Waterloo 72, B-1640 Rhode-St-Genese, Belgium, October 24, 2005
This VKI/RTO Lecture Series will present the perspectives
of international experts on past, present, and future flight experiment.
-
FLUENT Forum 2005
User Conference, Lisbon, Portugal, October 20, 2005
COMPUTATIONAL FLUID DYNAMICS - The innovation meeting - October 20th, 2005
-
Fluent Webinar: Morpher Based Shape Optimization for CFD Applications
Online Event, October 20, 2005
This webinar features step-by-step instruction showing how
to carry out a morpher based shape optimization exercise for
CFD analysis. Industry experts will present several shape
optimization scenarios involving real-world applications.
-
2nd Symposium on Advanced Turbulence Modeling for Industrial CFD
Conference, Guarapari, Brazil, October 19, 2005
The purpose of this symposium is to bring together researchers in the field of Turbulence Modeling to evaluate recent progresses, anticipate future modeling requirements and preview future research directions. Emphasis will be given to applications and solution of Industrial Problems. Authors are invited to participate in this event to expand international cooperation, understanding and dissemination of recent advances in the general area of Turbulence Modeling.
-
Fluent CFD Forum 2005
User Conference, Bad Nauheim, Germany, October 19, 2005
-
Introduction to FLUENT
Course, Lebanon, United States, October 17, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to FLUENT
Course, Fluent Inc., Ann Arbor, United States, October 17, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Airpak
Course, Fluent Inc., Lebanon, United States, October 17, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Airpak
Course, Fluent Inc., Atlanta, United States, October 17, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Icepak
Course, Santa Clara, United States, October 17, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Forum CFD Fluent 2005
User Conference, PARIS, France, October 13, 2005
-
Fluent Webinar: FloWizard 2 for University Users
Online Event, October 13, 2005
This webinar will inform the audience about the core
capabilities of Fluent’s newest CFD tool, FloWizard.
FloWizard is a rapid flow modeling CFD tool, meaning it is
designed from top to bottom for obtaining flow solutions in
an expedient fashion.
-
Fluent France Forum
User Conference, "le Tapis Rouge", PARIS, France, October 13, 2005
The 12nd edition of the Fluent Forum France was held on
October 13, 2005 to "le tapis rouge" in Paris. More than
300 participants answered our invitation, instituting this
day like event CFD of the year: industrialists and
academics, partners, press and association could
contribute to exchanges on the evolutions of the
engineering of virtual calculation.
-
Course, Paris, France, October 12, 2005
-
Advanced Training in FLUENT
Course, Houston, United States, October 12, 2005
This course is intended for experienced users of FLUENT v6 who are interested in more in-depth instruction on specific topics. Users may sign up for one or more days of instruction. Courses will consist of both lecture and hands-on examples.
|
