-
Optimizing Engineering Design with AI: A Focus on Ocean Energy Systems (OEDAI-2024)
Workshop, ICSR building, IIT Madras, Chennai, India, November 17, 2024
This workshop will showcase AI-driven design optimization
for offshore structures and ocean energy systems, involving
students, faculty, engineers, and researchers. Experts from
academia, industry, and research will discuss AI-driven
design, CFD, FEM, FSI in Ocean Engineering, ocean energy,
offshore infrastructure, and the blue economy. The goal is
to foster knowledge exchange and innovative solutions,
enhancing sustainable ocean infrastructure.
-
PreonLab 6.2 Release Event
Online Event, November 14, 2024
PreonLab 6.2 Online Release Event. Join to learn more about
latest
improvements to PreonLab 6.2. New full car suspension model,
linear
elastisity solver, thermal improvements and much more. Tune it to
learn more about it.
-
Physics Conference | Nuclear Physics Conference | Tokyo | Japan | 2024
Conference, TBD, Tokyo, Japan, Japan, November 14, 2024
The 5th International Conference on Physics is to be held on
November 14-15, 2024 Tokyo, Japan with a theme of Unveiling
the Frontiers of Physics: Pioneering Innovations for
Tomorrow's World.
-
20th Multiphase Flow Workshop - Conference and Short Course
Conference, Helmholtz-Zentrum Dresden - Rossendorf (HZDR) Bautzner Landstra, Dresden, Germany, November 11, 2024
The goal of the workshop is to bring together experimental and numerical practitioners, and to foster discussion and exchange of knowledge.
-
2nd International Summit on Power and Energy Engineering
Conference, Vancouver, Canada, Vancouver, India, November 4, 2024
We are thrilled to extend a warm welcome to the 2nd
International Summit on Power and Energy Engineering,
scheduled during November 04-06, 2024 in Vancouver, Canada.
Building on the success of our inaugural summit, this second
edition even promises to be more inspiring and impactful.
-
2024 CONVERGE CFD Conference
Conference, United States, October 29, 2024
Join us at CFD24, a free online conference that draws hundreds
of participants from around the globe, to see firsthand how
engineers are using state-of-the-art CFD simulations to
transform the future of technology.
-
Mastering Thermal Management with Thermal Visualization Tool for Cradle CFD
Online Event, October 16, 2024
Are you fully utilizing CFD thermal simulation to address
critical aspects of thermal management?
Join us for an insightful webinar where we introduce our
state-of-the-art CFD simulation and thermal analysis
visualization tool. Our advanced thermal visualization
technology focuses on thermal management, offering deep
insights for critical applications such as batteries and
PCUs.
-
2ND INTERNATIONAL SUMMIT ON AEROSPACE AND MECHANICAL ENGINEERING
Conference, Edinburgh, United Kingdom, Edinburgh, United Kingdom, October 14, 2024
The conference, organized by SPECTRUM conferences, will
provide a forum for researchers working on all aspects of
additive manufacturing. A wonderful opportunity will be
presented at the conference to introduce new participants to
this field as well as to spotlight innovative tools and
approaches.
-
2ND INTERNATIONAL SUMMIT ON AEROSPACE AND MECHANICAL ENGINEERING
Conference, Edinburgh, United Kingdom, Edinburgh, United Kingdom, October 1, 2024
Aerospace Engineering and Technology
Mechanical Engineering
Aerodynamics and Controls
Aerospace Manufacturing Engineering
Aircraft Control and Information Engineering
-
European SIMERICS User Meeting 2024
User Conference, Viale Isonzo, 14, 20135 Milano MI, Italien, Italy, October 1, 2024
Get-together for SIMERICS Users and/or people who are
interested in SIMERICS Software Environment
-
4th Automotive CFD Prediction Workshop
Conference, Queen's University Belfast, Belfast, United Kingdom, September 26, 2024
The 4th Automotive CFD Prediction Workshop (AutoCFD4) will be held on Sept 26th/27th 2024 at
Queen’s University Belfast. The main objective of the 4th Automotive CFD Prediction Workshop is to assess the
predictive capability of CFD codes for road-cars geometries. The aim is to provide practical modelling
guidelines to the automotive community e.g best-practice turbulence modelling, meshing, numerical schemes and
to bring the automotive CFD community together to discuss future directions.
-
5th Aspherix and CFDEM
Conference, Haus der Ingenieure, Eschenbachgasse 9, Vienna, Austria, September 26, 2024
A great networking and exchange opportunity for the DEM
software Aspherix and CFDEMcoupling user community.
-
ThermaEComp2024
Conference, Mediteranska 2, 85 310 , Budva, Montenegro, September 9, 2024
Sixth International Conference on Computational Methods for Thermal and Energy Problems
-
NUMAP-FOAM 2024
Course, The Cavendish Laboratory, Cambridge, United Kingdom, September 2, 2024
Annual OpenFOAM Summer School for Advanced developers
-
The International Conference on Liutex-based Vortex Identification Methods (ICLVIM 2024)
Conference, Suzhou, China, August 9, 2024
Vortices, characterized by swirling fluid motion, are ubiquitous in nature and engineering systems. The Liutex vector, the third-generation vortex identification method, offers an innovative mathematical and systematic definition for extracting vortices. This conference aims to provide a dedicated platform for researchers from diverse areas to showcase the capability of Liutex in various areas.
-
Webinar: Developments in AM PravaH for Authentic Simulation Experience: Part 1
Online Event, July 18, 2024
Join us for an exclusive webinar on the latest updates to AM
PravaH. Since the official launch of AMPravaH 1.5 in November
2023, we've made significant advancements to enhance
simulation accuracy and improve user experience.
Discover new features and the ability to save new alloys and
pause/resume simulations and much more.
Don't miss this opportunity to explore these powerful updates
and learn how you can improve your additive manufacturing
process using AM PravaH.
-
Large-Eddy Simulation, Detached-Eddy Simulations and Machine Learning using a Python CFD code
Course, On-line, Sweden, July 1, 2024
A three-day ONLINE course on LES, DES, IDDES using an in-house Python CFD code. The third day we will work on Machine Learning methods for improving wall-functions and turbulence modeling
-
FREE webinar on CFD for Data Centers & Thermal Design
Online Event, June 14, 2024
Join SCx Solutions Pte. Ltd. and Diabatix for a FREE webinar
on CFD for Data Centers & Thermal Design with ColdStream
Nxt.
-
Performance Engineering for Numerical Methods in Computational Fluid Dynamics (Free, Online)
Online Event, June 13, 2024
We are excited to announce our upcoming NHR4CES Community Workshop focusing on “Performance Engineering
for Numerical Methods in Computational Fluid Dynamics”. This workshop is designed to highlight recent
activities, developments, and new concepts for analyses and improvements centered around numerical methods
used in CFD applications.
-
CONVERGE Applications Workshop: Solutions for Low-Carbon Transportation
Workshop, Politecnico di Torino - Energy Center, Torino, Italy, June 11, 2024
Convergent Science, in partnership with the SAE International
Torino Section, is delighted to announce the 2024 CONVERGE
Applications Workshop: Solutions for Low-Carbon
Transportation. This free one-day event will focus on
solutions to reduce carbon emissions from transportation
systems. Technical presentations will offer insight into the
research activities underway in academia and industry around
the globe, to develop the next generation of sustainable
transportation technologies.
-
WEBINAR: The Role of CFD in Developing Oil & Gas and Offshore Technologies
Online Event, May 15, 2024
In this webinar, we’ll explore CONVERGE’s range of multi-
physics simulation capabilities that allow you to capture
the geometrical complexities, body dynamics, flow-chemistry
coupling, and conjugate heat transfer present in many oil
and gas industry systems.
-
CONVERGE Application Workshop: Hydrogen
Workshop, University of Orléans | Château de la Source, Orléans, France, May 15, 2024
Convergent Science, in partnership with the University of
Orléans, announces the 2024 CONVERGE
Application Workshop: Hydrogen! This event will highlight the
potential of green hydrogen as a fuel for sustainable
transportation systems. A series of technical presentations
will offer insight into the research and development of
innovative hydrogen technologies taking place in France and
around the globe. The CONVERGE Application Workshop will be
held on May 15 at the University of Orléans.
-
WEBINAR: Advancing Rotating Detonation Engines Using CFD
Online Event, May 8, 2024
In this webinar, we’ll discuss the tools CONVERGE CFD
software offers to simulate RDEs, including autonomous
meshing with Adaptive Mesh Refinement, a fully coupled
detailed chemistry solver, high-fidelity RANS and LES
turbulence models, and excellent parallel scaling. We'll
demonstrate how to apply these features to model hydrogen-
air, methane-oxygen, and ethylene-air RDEs.
-
CFD for Pumps
Online Event, April 30, 2024
FREE WEBINAR on CFD for Pumps! 🌟
👉 Secure your spot now by clicking on the link:
https://lnkd.in/ghSd6m2Y
📅 Date: 30th April 2024
🕚 Time: 11:00 AM IST | 01:30 PM SGT
🔍 Join us and learn from the experts using Cradle
CFD, part of Hexagon Manufacturing Intelligence.
🔗 Share this post with your network and colleagues who
might be interested in gaining insights into the world of
CFD and Cradle CFD.
-
NATIONAL CONFERENCE ON “PROGRESSES AND CHALLENGES IN AEROSPACE ENGINEERING” (NCPCAE’2024)
Conference, Rajalakshmi Engineering College, Chennai, India, April 26, 2024
NCPCAE'24 is dedicated to uniting professionals from
Aerospace, Mechanical Engineering, and various branches
of engineering pertinent to the Aerospace field.
-
ISimT-24
Conference, Leonardo Munich City East Hotel, Munich, Germany, April 23, 2024
ISimT-24 is a high-quality forum on applications, trends, and
developments in simulation technology for turbomachinery
applications. It allows you to collect innovative ideas for
your work and research and will help you increase your CFD
simulations’ efficiency.
-
CONVERGE ADVANCED TRAINING AT SAE WCX
Conference, Huntington Place (formerly TCF Center), Detroit, United States, April 15, 2024
Convergent Science will be hosting complimentary in-person
CONVERGE training at SAE's WCX World Congress Experience on
April 15.
-
WEBINAR: Drone Simulations for Urban Air Mobility
Online Event, April 10, 2024
In this webinar, we will demonstrate how CONVERGE can
overcome problems related to the application of external
aerodynamics to rotor and UAM-drone simulations to study
aerodynamic performance, stability, and noise generation and
propagation.
-
International Simulation Olympiad (ISimO)
Online Event, April 8, 2024
अन्तर्राष्ट्रीय सिमुलेशन प्रतिस्पर्धा or International Simulation Olympiad (ISimO) is an online global olympiad to promote and celebrate the excellent computational (simulation) engineering happening in academia around the world, using open-source software.
-
Siemen's Hosts Simcenter STAR-CCM+ Co-Creation Workshop
Workshop, United States, March 27, 2024
The underlying question: “Why is this design better than
another?” can usually be answered by doing comparative data
analysis based on quantitative and qualitative data.
Regarding qualitative data analysis, there are exciting ways
to compare data (for example pixel-by-pixel and/or 3D
surface mapping and interpolation). The intent of this event
is to gather use cases and feedback for the different
comparison methods and workflows.
-
WEBINAR: Enabling 3D Coupled Battery Simulations With CONVERGE CFD Software
Online Event, March 13, 2024
In this webinar, we will discuss the 3D modeling capabilities
available in CONVERGE CFD software for battery applications.
-
OpenLB Spring School
Workshop, Heidelberg Science Academy, Heidelberg, Germany, March 4, 2024
Lattice Boltzmann Methods with OpenLB software lab
-
Introduction to Aeroelasticity - Aircraft & Turbomachinery, a von Karman Institute Course
Course, Waterloosteenweg 72, 1640 Sint-Genesius-Rode, Belgium, February 19, 2024
You will explore the applications of aeroelasticity in aircraft and turbomachinery design and R&D projects. Starting from the fundamental principles of aeroelasticity, this course will familiarize the participants with concepts such as aeroelastic deformation, static divergence, control reversal, flutter and gust loads.
-
Maximize Business Impact of Modeling And Simulations
Online Event, February 15, 2024
In this webinar, we present key strategies to successfully address
this problem of Simulation Data Management. Methods by which
simulation data can be converted into storable process insights are
first presented. Followed by a description of a workflow that
enables efficient storage & curation of the process insights. Last,
we present methodologies by which the stored process insights can be
distributed for easy consumption by the greater process engineering
community within the organization.
-
WEBINAR: Development of an Aero-Servo-Elastic Module for the Next Generation of Horizontal-Axis Wind Turbines
Online Event, February 14, 2024
In this webinar, guest speaker Leonardo Pagamonci from the
University of Florence will discuss the development and
implementation of an aero-servo-elastic module, CALMA
(CONVERGE Actuator Line Model for Aeroelasticity), into
CONVERGE CFD software.
-
A Look at Tecplot 360 2023 R2 and What’s Coming in 2024
Online Event, February 7, 2024
At Tecplot, we’ve been working on some major enhancements to
Tecplot 360. In this webinar, we will be reviewing the
details of our Tecplot 360 2023 releases, and giving you a
sneak peek into what’s planned in 2024.
-
Advances in flood modelling and forecasting
Workshop, The Wave, 2 Whitham Road, Sheffield, S10 2AH, United Kingdom, February 1, 2024
This one and a half day event will present recent research developments and discuss research findings and
questions, covering fundamental, computational and applied aspects of flood modelling and forecasting. It
provides a unique forum for research students, academics, flood-related researcher developers and
practitioners to discuss latest research and future needs, over an excellent networking opportunity.
-
Dutch OpenFOAM User meeting
Workshop, Delft, Netherlands, January 26, 2024
The Dutch OpenFOAM User meeting provides a way for all
active OpenFOAM users in the Netherlands to meet up and
discuss. The morning session consists of a hands-on tutorial
session aimed at PhD and MSc students. The afternoon session
consists of several presentations in a conference-format.
-
CONVERGE for Hydrogen Combustion Modeling: Transportation, Aerospace & Safety
Online Event, January 24, 2024
CFD is an effective tool for designing H2-powered ICEs and
gas turbines, as well as relevant auxiliary technologies.
CFD provides insight into the governing physics of these
systems and offers an economical method to test possible
solutions and methods.
-
PreonLab 6.1 Online Release Event
Online Event, January 23, 2024
Join us for the Release Event of our upcoming version 6.1 which will include
extended GPU support, Multi-GPU capability and much more!
-
Introduction to Computational Fluid Dynamics, a von karman Institute Lecture Series
Course, Waterloosesteenweg , 1640 Sint-Genesius-Rode, Belgium, January 22, 2024
The VKI presents a interesting lecture series that's perfect for both beginners and professionals, and we want YOU to be a part of it. The objective of these hybrid (online / on-site) lecture series is to provide an elementary tutorial presentation on computational fluid dynamics (CFD), emphasizing the fundamentals and surveying a variety of solution techniques whose applications range from low speed incompressible flow to hypersonic flow.
-
21st International Icing Course - CFD + EFD Simulation Methods for In-Flight Icing Certification
Online Event, January 22, 2024
The lectures cover the major aspects of in-flight icing
simulation, ice protection systems, and handling quality
issues. The instructors bring an amalgam of knowledge, as
scientists who have developed codes in current use and
engineers with certification experience combining CFD, EFD,
and FFD, along with cost-effective simulation methods widely
used internationally for certification of aircraft for flight
into known icing.
-
International Simulation Olympiad (ISimO) 2024
Online Event, January 1, 2024
अन्तर्राष्ट्रीय सिमुलेशन प्रतिस्पर्धा or International Simulation Olympiad
(ISimO) is an online global olympiad to promote and
celebrate the excellent computational (simulation)
engineering happening in academia around the world, using
open-source software. ISimO, organized by Paanduv
Applications, invites all students (bachelor level, master
level, or PhDs) to register for the event on an individual
basis or in teams.
-
International Conference on Simulation & Modelling
Conference, University of Sri Jayewardenepura, Colombo, India, January 1, 2024
The International Conference on Simulation and Modelling -
ISiM 2024 organized by the Advanced Engineering Simulation
Center at the Faculty of Engineering, University of Sri
Jayewardenepura Sri Lanka, in collaboration with the
University of Moratuwa Sri Lanka, will be taking place on
the 5th and 6th of December 2024 in Colombo Sri Lanka.
-
The International Conference on Liutex-based Vortex Identification Methods (ICLVIM 2024)
Conference, Suzhou, China, January 1, 2024
Vortices, characterized by swirling fluid motion, are
ubiquitous in nature and engineering systems. The Liutex
vector, the third-generation vortex identification method,
offers an innovative mathematical and systematic definition
for extracting vortices. This conference aims to provide a
dedicated platform for researchers from diverse areas to
showcase the capability of Liutex in various areas.
-
Tecplot for Students – Tour the Academic Suite
Online Event, January 1, 2024
In this webinar, we’ll take you through the Academic Suite and
the license options available for our academic users.
-
27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2023)
Conference, Indian Institute of Technology Patna, Patna, India, December 14, 2023
Indian Society of Heat and Mass Transfer - ISHMT has
entrusted the Department of Mechanical Engineering, IIT
Patna, with the responsibility of organizing the 27th
National and 5th International ISHMT-ASTFE Heat and Mass
Transfer Conference (IHMTC-2023). The goal of this
classical conference is to gather scholars from all over the
world to present advances in the fields of transport
phenomena and to foster an environment conducive to
exchanging ideas and information.
-
https://www.icome.tsme.org/icome2023/
Conference, Centara Riverside Hotel , Chiang Mai, Thailand, December 12, 2023
Thai Society of Mechanical Engineers (TSME) and Chiang Mai University invites all researcher for a conference in Mechanical Engineering this December.
-
Live Online Event: Parallel Post on HPC Made Easy with FieldView 2023
Online Event, December 6, 2023
Parallel setup from your local machine to an HPC system has
never been easier with FieldView 2023.Join us as we cover
all the new features, fixes, and performance improvements
that are available with this release.
-
Finite Volume and Spectral Methods for Hyperbolic Problems
Workshop, TIFR-CAM, Bangalore, India, December 4, 2023
The workshop is on numerical methods for hyperbolic PDE like those arising in fluid flow problems. It is targeted for PhD students and advanced masters students with sufficient background in numerical methods. It will of interest those working on compressible flows and other hyperbolic models.
-
A three-day online course Large Eddy Simulation (LES), hybrid LES-RANS, Detached Eddy Simulation (DES) and unsteady RANS.
Course, Zoom, Sweden, December 4, 2023
The course will give an introduction to LES and hybrid RANS/LES. Day 3, an introduction will be given on how to use Machine Learning for improving underlying RANS turbulence models.
-
OpenFOAM Alchemist
Workshop, O'Brien Centre of Science, University College Dublin, Dublin 4, Dublin, Ireland, November 27, 2023
Get ready to unleash your inner superhero as we dive into the magical world of
OpenFOAM, turning novices into alchemists/in-person/online.
-
From Data To Decisions – Getting The Best Out Of Simulations
Online Event, November 21, 2023
In this live webinar, you'll learn how CFD & FEA Analysts
can publish Modeling and Simulation Data, integrate with
apps and third-party tools, & enable deeper collaboration
with the process & product development teams.
-
Icing physics and ice accretion simulation, a von Karman Institute Course
Course, Waterloosesteenweg 72, 1640 Sint-Genesius-Rode, Belgium, November 20, 2023
Emphasis is put on the relation between icing physics, meteorological aspects, important factors affecting icing and icing conditions defined in airworthiness certification requirements. This course is continuously updated following the research activities at the VKI. At the end of the course the student should understand the basic vocabulary and philosophy of icing physics.
-
Webinar: 30-Minute History Match Validation
Online Event, November 8, 2023
In this live webinar, you'll learn how to complete a history
match validation workflow in 30 minutes with Tecplot RS 2023
R1.
-
14th Asian Computational Fluid Dynamics Conference 2023
Conference, Bangalore, India, October 30, 2023
The 14th Asian Computational Fluid Dynamics Conference
(ACFD2023) will be held on 30 October - 2nd November 2023 in
Bengaluru, India. The reputed conference will provide an
opportunity to researchers in the field of computational fluid
dynamics to present their latest research results. Selected
papers will be published in peer-reviewed International
journals.
-
17th Edition of International Conference on Catalysis, Chemical Engineering and Technology (Catalysis 2023)
Conference, Hilton Boston/Woburn,2 Forbes Road, Woburn, Massachusetts, 0180, Boston, United States, October 26, 2023
Magnus group Conferences is pleased to invite all the participants
from all over the world to attend “International Conference on
Catalysis, Chemical Engineering and Technology” during October 26-
28, 2023 in Boston, Massachusetts, USA which includes Keynote
presentations, Oral talks, Poster presentations and Exhibitions.
-
Hydrogen for Sustainable Mobility Forum
Conference, Energy Center - Politecnico di Torino , Torino, Italy, October 17, 2023
Convergent Science and SAE International Torino Section are
delighted to announce the first edition of the Hydrogen for
Sustainable Mobility Forum, taking place at the Energy Center
of Politecnico di Torino on October 17–18, 2023.
-
The 3rd GPPS Turbomachinery CFD workshop
Workshop, Hong Kong University, Hong Kong, Hong Kong, October 16, 2023
The workshop will take place as part of the GPPS Hong Kong23
conference on October 16, 2023.The workshop will take place
in a hybrid format.
-
Design and CFD of Turbomachines-Online workshop
Course, India, October 14, 2023
This is an online workshop on the weekends to learn the
fundamental theory of turbomachines, design of blades and
impeller and the CFD modelling/simulation of turbomachines.
-
From Data To Decisions – Getting The Best Out Of Simulations
Online Event, October 12, 2023
Agenda:
- Challenges associated with extracting and utilizing
process insights from CFD simulation data,
- Examples of successful conversion of CFD data into process
knowledge & its best practices,
- Strategies for organizing and storing process knowledge in
a meaningful way,
- Importance of collaboration and knowledge sharing in
process knowledge management,
- Real-life case studies of successful implementation of
process knowledge management in organizations
-
AI-Based Physics Predictions in Your Web-Browser
Online Event, October 4, 2023
SimScale will show you a preview of its
fully integrated AI-based physics simulations and how they
will disrupt the engineering world. SimScale’s mission to
bring simulation to every engineer now extends to AI tools
which will sit right next to the physics solvers, giving
designers easy access to both via a login from a web
browser.
Engineers will now be able to simulate their designs in
real-time with instant results powered by the almost
unlimited computing power of the cloud.
-
Berechnung Turbulenter Strömungen 27.-29.9.23 (in German)
Course, Dresden, Germany, September 27, 2023
Kurs "Numerische Berechnung turbulenter Strömungen in Forschung und Praxis" in Dresden, 27.-29.9.2023
//
Detaillierte, fundierte Einführung in die verschiendenen Ansätze der Turbulenzmodellierung und examplarische Anwendung von sehr erfahrenen, international ausgewiesenen Experten
//
Prof. J. Fröhlich, Prof. M. Breuer, Dr. F. Menter
Dr. G. Scheuerer, Prof. M. Sommerfeld
-
2023 CONVERGE CFD Conference
Conference, United States, September 26, 2023
Join engineers and researchers from around the world at the
2023 CONVERGE CFD Conference (CFD23)! The theme of CFD23 is
“Simulation for Sustainable Technology”. CFD is a powerful
tool for designing cleaner, more efficient products and
enhancing our understanding of the world around us.
-
Webinar: Faster CFD Post-Processing with TecIO and FEMixed Zones
Online Event, September 20, 2023
TecIO can help you produce smaller files by utilizing the
new FEMixed zone type. In this webinar, you’ll learn the
basics of the Tecplot TecIO library and how the FEMixed zone
type can be used to export data up to 65% smaller than the
equivalent Tecplot PLT file. This webinar will also cover
how to export high order elements to Tecplot’s SZL file
format for use with Tecplot 360 2023 R1.
-
10th International Symposium on Turbulence, Heat and Mass Transfer (THMT-23)
Conference, University "La Sapienza", Faculty Of Engineering, Rome, Italy, September 11, 2023
The 10th Symposium on Turbulence, Heat and Mass Transfer (THMT-23) will assemble Scientists
and Engineers in the area of Turbulence-related Heat and Mass Transfer to discuss recent
advances, emerging challenges and future prospects in research and applications. Major topics
and new trends will be addressed by invited Keynote Speakers.
Organizing Secretary: Dr. Paolo Venturini (Email: thmt-23@thmt-23.org)
-
Second exaFOAM Summer School
Course, Nobelstraße 19, Stuttgart, Germany, September 6, 2023
The second exaFOAM Summer School is a three-day event aimed
at OpenFOAM users with challenges related to High-
Performance Computing (HPC). Both academic and industrial
participants are welcome.
-
14. International Conference on Computational Heat and Mass Transfer (ICCHMT2023)
Conference, Münsterstr. 156, Düsseldorf, Germany, September 4, 2023
The conference series ICCHMT is being held periodically, since 1999. It is one of the major international platforms in the area of heat and mass transfer, bringing researchers form all around the world together, working on the computational methods in heat and mass transfer.
-
NUMAP-FOAM Summer School 2023
Course, Maxwell Building, Cambridge, United Kingdom, September 4, 2023
Summer School on Modelling of Coupled Problems in Applied Physics with OpenFOAM in Cambridge, 4-15/Sep/2023
-
Maximize Business Impact of Modeling & Simulations
Seminar, United States, August 31, 2023
In this seminar, we present some key strategies to
successfully address the problem of process knowledge
management. Methods by which simulation data can be
converted into process knowledge. This
is followed by a description of a workflow that enables
efficient storage and curation of the process knowledge.
Finally, we present methodologies by which the stored
process knowledge can be distributed for easy consumption by
the greater process engineering community within the
organization.
-
20th International Bhurban Conference on Applied Sciences and Technology (IBCAST)
Conference, Bhurban, Murree Hills, Pakistan, August 22, 2023
IBCAST has been held consecutively in Islamabad, Pakistan
since 2002. It covers ten technological areas simultaneously,
including Advanced Materials, Aerostructures, Artificial
Intelligence and Software Technologies, Biosciences, Control
& Signal Processing, Cyber Security, Fluid Dynamics, Medical
Sciences, Underwater Technologies, and Wireless Communication
& Radar. The conference maintains a highly competitive and
challenging review process, resulting in excellent quality
papers.
-
The VI AMMCS International Conference Waterloo, Ontario, Canada
Conference, Waterloo, Canada, August 14, 2023
AMMCS-2023 is a major international forum and interdisciplinary conference focused
on mathematical and computational sciences, with their applications to modeling
natural, social, and engineering systems.
-
19th Multiphase Flow Conference and Short Course
Course, HZDR Campus Dresden-Rossendorf, Dresden, Germany, June 19, 2023
The goal of the conference is to bring together experimental and numerical practitioners from the academic research as well as from the industry and to foster discussions and exchange of knowledge.
-
19th Multiphase Flow Conference and Short Course
Conference, HZDR Campus Dresden-Rossendorf , Dresden, Germany, June 19, 2023
The goal of the conference is to bring together experimental and numerical practitioners from the academic research as well as from the industry and to foster discussions and exchange of knowledge.
-
Online and offline Courses on CFD & FEM analysis (Ansys Fluent, Ansys CFX, Siemens Star CCM Plus) from 19-June-2023
Course, JC Plaza, No.716 (35), 42nd cross, Rajaji nagar 3rd block,, Bangalore, India, June 19, 2023
Visit our website to pick a course of your choice
https://nicecfd.com/allcourses
Niharika Institute of Computational Engineering is a trusted Institute , providing Industry oriented training on CFD analysis since 2010. We use genuine and licensed CFD software in all our courses.
-
Open-source Computational Fluid Dynamics Course
Course, Roskilde University, Universitetsvej 1, Building 27, Room 27.1, Roskilde, Denmark, June 19, 2023
Open-source CFD Course Part I & II will be held at Roskilde University 19-23 June, 2023. The course is for PhD students and industrial participants. It is offered in collaboration with Aalborg University and will be taught by Johan Roenby and Jakob Hærvig.
Please visit opensourcecfdcourse.dk
-
1st exaFOAM Workshop
Workshop, Online, Germany, June 12, 2023
The exaFOAM project (exafoam.eu) is organizing the first
exaFOAM Workshop, which is aimed at pushing the boundaries
of Computational Fluid Dynamics (CFD) technology using
OpenFOAM.
-
Online and offline Courses on CFD & FEM analysis (Ansys Fluent, Ansys CFX, Siemens Star CCM Plus) from 05-June-2023
Course, JC Plaza, No.716 (35), 42nd cross, Rajaji nagar 3rd block,, Bangalore, India, June 5, 2023
Visit our website to pick a course of your choice
https://nicecfd.com/allcourses
Niharika Institute of Computational Engineering is a trusted Institute , providing Industry oriented training on CFD analysis since 2010. We use genuine and licensed CFD software in all our courses.
-
Global Symposium on CFD a Joint Event for the World Congress of Chemical Engineering
Conference, Buenos Aires - Argentina - June 4-8, 2023, Buenos Aires, Argentina, June 4, 2023
The scope of the symposium covers the application of CFD in
chemical
processes, equipment design and optimization and also new
emerging CFD
technologies. It is a forum for engineers and researchers
who work with
CFD to exchange ideas and present their contributions.
Contributions focused on these areas are welcomed:
Chemical processes design
Equipment design and optimization
New emerging CFD technologies
-
Online and offline Courses on CFD & FEM analysis (Ansys Fluent, Ansys CFX, Siemens Star CCM Plus) from 16-May-2023
Course, JC Plaza, No.716 (35), 42nd cross, Rajaji nagar 3rd block,, Bangalore, India, May 16, 2023
Visit our website to pick a course of your choice
https://nicecfd.com/allcourses
Niharika Institute of Computational Engineering is a trusted Institute , providing Industry oriented training on CFD analysis since 2010. We use genuine and licensed CFD software in all our courses.
-
Online and offline Courses on CFD & FEM analysis (Ansys Fluent, Ansys CFX, Siemens Star CCM Plus) from 02-May-2023
Course, JC Plaza, No.716 (35), 42nd cross, Rajaji nagar 3rd block,, Bangalore, India, May 2, 2023
Visit our website to pick a course of your choice
https://nicecfd.com/allcourses
Niharika Institute of Computational Engineering is a trusted Institute , providing Industry oriented training on CFD analysis since 2010. We use genuine and licensed CFD software in all our courses.
-
4th Aspherix® & CFDEM® Conference
Conference, Park Inn by Radisson Hotel, Linz, Austria, April 20, 2023
DCS Computing is very proud to announce that the 4th full
in-person Aspherix® & CFDEM®coupling Conference will be held
in Linz, Austria on 20-21 April 2023.
This will be a great networking and exchange opportunity for
the DEM software Aspherix® and CFDEM®coupling user community
with interesting presentations, lively discussions and an
enjoyable time!
-
FieldView Restarts: More Than Save and Restore
Online Event, April 19, 2023
This webinar will show you simple yet powerful techniques
using
FieldView's Restart tool. Restarts will save you time and
help you
reuse your work.
-
Online and offline Courses on CFD & FEM analysis (Ansys Fluent, Ansys CFX, Siemens Star CCM Plus) from 17-April-2023
Course, JC Plaza, No.716 (35), 42nd cross, Rajaji nagar 3rd block,, Bangalore, India, April 17, 2023
Visit our website to pick a course of your choice
https://nicecfd.com/allcourses
Niharika Institute of Computational Engineering is a trusted Institute , providing Industry oriented training on CFD analysis since 2010. We use genuine and licensed CFD software in all our courses.
-
Online and offline Courses on CFD & FEM analysis (Ansys Fluent, Ansys CFX, Siemens Star CCM Plus) from 03-April-2023
Course, JC Plaza, No.716 (35), 42nd cross, Rajaji nagar 3rd block,, Bangalore, India, April 3, 2023
Visit our website to pick a course of your choice
https://nicecfd.com/allcourses
Niharika Institute of Computational Engineering is a trusted Institute , providing Industry oriented training on CFD analysis since 2010. We use genuine and licensed CFD software in all our courses.
-
Shallow Flows
Conference, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, April 3, 2023
The purpose of this Lecture Series (online / on-site) is to offer an overview of various aspects of shallow flows: fundamental as well as applied aspects, and numerical modelling as well as laboratory studies and field observations.
-
Parallelization in OpenFOAM for HPC Deployment
Workshop, Germany, April 3, 2023
The training will be concerned with introducing the participants to the different concepts of parallelization in OpenFOAM, along with code examples for illustration. Moreover, we will provide hands-on exercises to further deepen and solidify the transferred knowledge.
-
Computational Fluid Dynamics: From basics to practical
Course, India, April 1, 2023
Learning and Training course is started through online-mode
Topic: Computational Fluid Dynamics course will be taught
from
basics.
Eligible audience: BE/BTech (Aerospace, Mechanical)(2nd
year,
3rd year and 4th Year)
-
Tecplot 360 for Beginners
Online Event, March 29, 2023
Live Webinar: Tecplot 360 for Beginners. Join us on March 29
to learn how to load, plot, and explore your results with
the 360 suite of tools. You’ll benefit by working and
communicating your results more effectively!
-
Special Issue: Advances in Computational Fluid Dynamics and Applications
Australia, March 28, 2023
The issue will be published by MDPI Mathematics (Q2 Scimago,
Q1 JCR, Q1 CiteScore) . The topics include all areas in CFD.
The deadline for manuscript submission is 31 January 2024.
Guest editor: Dr Zhenquan Li (Australia)
-
Online and offline Courses on CFD & FEM analysis (Ansys Fluent, Ansys CFX, Siemens Star CCM Plus) from 15-March-2023
Course, JC Plaza, No.716 (35), 42nd cross, Rajaji nagar 3rd block,, Bangalore, India, March 15, 2023
Visit our website to pick a course of your choice
https://nicecfd.com/allcourses
Niharika Institute of Computational Engineering is a trusted Institute , providing Industry oriented training on CFD analysis since 2010. We use genuine and licensed CFD software in all our courses.
-
Online and offline Courses on CFD & FEM analysis (Ansys Fluent, Ansys CFX, Siemens Star CCM Plus) from 01-March-2023
Course, JC Plaza, No.716 (35), 42nd cross, Rajaji nagar 3rd block,, Bangalore, India, March 1, 2023
Visit our website to pick a course of your choice
https://nicecfd.com/allcourses
Niharika Institute of Computational Engineering is a trusted Institute , providing Industry oriented training on CFD analysis since 2010. We use genuine and licensed CFD software in all our courses.
-
CAS Computational Fluid Dynamics
Course, Rapperswil, Switzerland, February 23, 2023
Computer-based flow simulations make it possible to optimise
products and processes quickly and efficiently. In the CAS
Computational Fluid Dynamics, you will gain a fundamental
knowledge of their successful application and get to know
helpful practical tools.
-
Online and offline Courses on CFD & FEM analysis (Ansys Fluent, Ansys CFX, Siemens Star CCM Plus) from 15-February-2023
Course, JC Plaza, No.716 (35), 42nd cross, Rajaji nagar 3rd block,, Bangalore, India, February 15, 2023
Visit our website to pick a course of your choice
https://nicecfd.com/allcourses
Niharika Institute of Computational Engineering is a trusted Institute , providing Industry oriented training on CFD analysis since 2010. We use genuine and licensed CFD software in all our courses.
-
preCICE Workshop 2023
Workshop, LRZ, Garching, Germany, February 13, 2023
The 4th workshop of the open-source coupling library preCICE is around the corner: February 13-16 in Munich (limited places). This may be particularly interesting for people working on complex multi-physics simulations, such as fluid-structure interaction, conjugate heat transfer, and a wide range of other problems that need more than one simulation code (e.g., coupling OpenFOAM to your in-house code). The workshop includes training courses, talks, hands-on user support sessions, and more.
-
Online and offline Courses on CFD & FEM analysis (Ansys Fluent, Ansys CFX, Siemens Star CCM Plus) from 01-February-2023
Course, JC Plaza, No.716 (35), 42nd cross, Rajaji nagar 3rd block,, Bangalore, India, February 1, 2023
Visit our website to pick a course of your choice
https://nicecfd.com/allcourses
Niharika Institute of Computational Engineering is a trusted Institute , providing Industry oriented training on CFD analysis since 2010. We use genuine and licensed CFD software in all our courses.
-
3rd World Conference on Aerospace Engineering
Conference, Amsterdam, Netherlands, January 18, 2023
The organizer of the Aerospace Engineering Conference
2023 invites all participants from all over the world to join
the famous scientific “3rd World Conference on Aerospace
Engineering" which will take place as a Webinar on January 18-
19, 2023.
-
Webinar: Tecplot 360 2022 Release 2
Online Event, December 15, 2022
Join us for the Webinar introducing Tecplot 360 2022 R2. For
the very first time, we are offering Batch-Pack licensing,
which enables a single user access to multiple concurrent
batch instances of our Python API (PyTecplot) while
consuming only a single license seat.
|
