-
Quality & Reliability of CFD Simulations IV: Multi-phase and Free-surface Flows
Seminar, East Midlands Conference Centre, Nottingham, United Kingdom, March 5, 2008
The focus of this joint NAFEMS-ERCOFTAC seminar is the
modelling of multi-phase and free-surface flows. Its aim is
to bring together current and potential users of CFD to
present and discuss methodologies to obtain reliable and
consistent results for multi-phase and free-surface flows.
The seminar will also illustrate best practice in CFD, as
well highlighting findings which have wider relevance and
impact.
-
ANSYS Michigan Seminar Series: Rapid Meshing of Complicated Geometry
Seminar, The Inn at St. Johns, Plymouth, United States, February 22, 2008
TGrid 5.0 can help address meshing bottleneck issues. At
this free seminar, find out how TGRid wrapper can help you
achieve faster turnaround time, more accuracy, more fine-
tuned designs, and increased productivity.
-
ANSYS Free Offshore Oil and Gas Seminar
Seminar, La Quinta Inn & Suites , Houston, United States, February 21, 2008
1/2-day free seminar to help you achieve a better
understanding of your designs, and reach improved
efficiencies in equipment design and installations while
gaining engineering insights that will help reduce
development costs and maximize performance.
-
Stroemungsinduzierter Schall - Aeroakustik 2008
Course, Lehrstuhl fuer Stroemungsmechanik, Cauerstr. 4, Erlangen, Germany, February 19, 2008
Der Kurzlehrgang gibt hierzu eine Einfuehrung in das Gebiet
des stroemungsinduzierten Schalls. Er zeigt den momentanen
Entwicklungsstand experimenteller und numerischer Verfahren
zur Bestimmung der aeroakustischen Laermquellen und deren
Ausbreitung. Es werden die Moeglichkeiten des Einsatzes fuer
industrielle Entwicklungsarbeiten aufgezeigt. Dies
beinhaltet die Fahrzeugaeroakustik, den Bereich der
Stroemungsmaschinen, aber auch Fragen des
Verbrennungslaerms.
-
Introductuctory OpenFOAM Training
Course, Beaumont House, Old Windsor, United Kingdom, February 14, 2008
Following the hugely popular and well supported OpenFOAM
International CFD Conference (www.openfoam-conference.com),
ICON have had numerous requests to repeat the training
courses that were offered before and after the conference.
An introductory OpenFOAM training course in now scheduled
for Thursday 14th and Friday 15th February 2008, at Beaumont
House, Windsor, UK. Please contact training@icon-cg.co.uk to
register or visit
www.icon-cg.co.uk/icon/site/content.php?sel=215 for further
information.
-
CFD - an Executive Overview Short Course
Course, 83, School of Engineering, Cranfield University, Cranfield, United Kingdom, February 1, 2008
This one day course provides an appreciation of the
application of CFD to general engineering, environmental and
biological flows, emphasising both the capabilities and
limitations.
-
High Performance Computing for CFD - Short Course
Course, 83, School of Engineering, Cranfield University, Cranfield, United Kingdom, January 31, 2008
This one-day short course provides specialised technical
knowledge for those new to, or working within, the rapidly
expanding global High Performance Computing (HPC) sector.
-
Validation and Verification for Credible CFD Short Course
Course, 83, School of Engineering, Cranfield University, Cranfield, United Kingdom, January 30, 2008
This one day course explores the requirements for credible
CFD simulations.
-
Introduction to Computational Fluid Dynamics (CFD) & Turbulence Modelling Short Course
Course, 83, School of Engineering, Cranfield University, Cranfield, United Kingdom, January 28, 2008
This two day course is designed to provide an introduction
to the use and application of CFD for practical engineering
flows. The course is especially appropriate for those with
no previous experience of CFD who wish to gain a basic
understanding of the concepts involved.
-
Computational Electromagnetics: Basics & Applications
Workshop, Dept of Physics SV college, Tirupati, India, January 23, 2008
This workshop is aimed at training of students and
practicing engineers in Computational Electromagnetics. The
workshop will be conducted by NARL and Zeus Numerix jointly.
Lectures will be given by IIT Professors and hands on will
be taken by Zeus engineers.
-
6th International Bhurban Conference on Applied Sciences & Technology
Conference, CESAT, Islamabad, Pakistan, January 7, 2008
To break the isolation in Science. The activities include
are 1) Control & Simulation
2) Wireless Communication & Radar
3) Computational Fluid Dynamics
4) Medical Science
5) Advanced Materials
6) Underwater Acoustics
-
International Conference on Thermal Energy and Environment
Conference, Department of Mechanical Engineering, KALASALINGAM UNIVERSITY , Srivilliputhur, India, January 1, 2008
International Conference on Thermal Energy and Environment
(INCOTEE 2011) aims to provide a common platform for
gathering of scientists, leading engineers, industry
experts,
research scholars and advanced student learners to exchange
and share their experiences and research outcome. INCOTEE
2011 focus on new advances and research results in the
fields of theoretical and experimental applied Thermal
Engineering, Energy and Environment.
-
International Conference on Thermal Energy and Environment
Conference, Department of Mechanical Engineering, KALASALINGAM UNIVERSITY , Srivilliputhur, India, January 1, 2008
International Conference on Thermal Energy and Environment
(INCOTEE 2011) aims to provide a common platform for
gathering of scientists, leading engineers, industry
experts,
research scholars and advanced student learners to exchange
and share their experiences and research outcome. INCOTEE
2011 focus on new advances and research results in the
fields of theoretical and experimental applied Thermal
Engineering, Energy and Environment.
-
GLS-8, the 8th International Conference on Gas-Liquid and Gas-Liquid-Solid Reactor Engineering
Conference, Indian Institute of Technology-Delhi, New Delhi 110 016, India, December 16, 2007
GLS-8 will focus on science & technologies of two-phase
and three-phase flows in process vessels, new techniques
of experimentation, modeling & simulation, and other
innovations that are likely to address the needs of the
chemical process, refining and fertilizer industries in
the coming decades.
-
2007 ANSYS Power Generation Conference
Conference, Hilton New Orleans Riverside, New Orleans, United States, December 10, 2007
One-day conference showcasing the latest in engineering
simulation solutions for the power industry.
-
Free ANSYS Offshore Seminar
Seminar, La Quinta Inn & Suites, Houston, United States, December 6, 2007
Find out how CAE can help you and your company gain an
advantage at the ANSYS Free Seminar on Solving Real-World
Engineering Problems in the Offshore Industry.
-
ANSYS FLUENT Educational Seminar - Sharpen Your CFD Perception
Seminar, Hewlett Packard, Rocky Hill, United States, November 29, 2007
Join two recognized authorities in the field of CFD, ANSYS
Fluent CTO, Dr. Dipankar Choudhury & CAE Associates CFD
Manager, Dr. Hsin-Hua Tsuei, for live presentations
highlighting the state-of-the-art in CFD technologies. Get
the experts' view of what the future holds, including the
powerful integration of FLUENT & ANSYS software. In
addition, hear from representatives at Hewlett-Packard
about how best to optimize your in-house computer hardware
to maximize the performance of CFD analysis.
-
ANSYS FLUENT Educational Seminar - Sharpen Your CFD Perception
Seminar, Hiton Garden Inn, Rockaway, United States, November 28, 2007
Join two recognized authorities in the field of CFD, ANSYS
Fluent CTO, Dr. Dipankar Choudhury & CAE Associates CFD
Manager, Dr. Hsin-Hua Tsuei, for live presentations
highlighting the state-of-the-art in CFD technologies. Get
the experts' view of what the future holds, including the
powerful integration of FLUENT & ANSYS software. In
addition, hear from representatives at Hewlett-Packard
about how best to optimize your in-house computer hardware
to maximize the performance of CFD analysis.
-
ADVANCES IN TURBOMACHINERY AERO-THERMO-MECHANICAL DESIGN AND ANALYSIS
Conference, Wright patterson Air Force base at the Wright State University, Dayton, United States, November 27, 2007
The present multidisciplinary Lecture Series addresses the
current state of the art in the design and analysis of
axial Turbomachinery components.
-
OpenFOAM International Conference 2007
Conference, Beaumont House, Burfield Road, Old Windsor, United Kingdom, November 26, 2007
The first OpenFOAM International Conference is designed to
bring together users and managers to a UK location well
served by international transport links.
-
Seventh Asian Computational Fluid Dynamics (ACFD7) Conference
Conference, National Science Seminar Complex, Indian Institute of Science, Bangalore, India, November 26, 2007
The Asian Computational Fluid Dynamics (ACFD) Conference is
held once every two years. The major objective of ACFD is to
provide a common forum for exchange of new ideas and
experiences amongst the scientists and engineers from Asia
as well as other parts of the globe, working on algorithms
and applications of CFD.
-
ANSYS Conference & 25th CADFEM Users' Meeting
User Conference, International Congress Center, Dresden, Germany, November 21, 2007
Simulation technologies in computational fluid dynamics,
structural mechanics or multiphysics are moving ever closer
toward one another. They will "converge" at the very first
users' conference held jointly by Fluent Deutschland, ANSYS
Germany and CADFEM. The event will provide participants
with
highly applicable information about current trends,
innovative applications, new developments and the
possibilities of integrating CAE software into their
development process.
-
American Physical Society Division of Fluid Dynamics 60th Annual Meeting
Conference, Salt Palace Convention Center, Salt Lake City, United States, November 18, 2007
The Division of Fluid Dynamics promotes the advancement and
dissemination of knowledge in all areas of fluid dynamics.
The organizers invite contributions describing theoretical,
computational, and experimental research in the entire range
of fundamental fluid phenomena and fluid dynamics
applications.
-
NUMECA Advanced Workshop
Workshop, Brussels, Belgium, November 8, 2007
NUMECA International is offering User-Meeting attendees a
hands-on experience on the latest versions of FINE/Turbo,
AutoGrid, HEXPRESS, FINE/Hexa, FINE/Marine, AutoBlade and
FINE/Design3D.
-
NUMECA User Meeting 2007
User Conference, Sheraton Brussels Hotel, Brussels, Belgium, November 6, 2007
Join us for two days of user presentations from all over
the world, product seminars, technical discussions and
keynote sessions. The topics of the meeting will include
the most exciting new developments in the NUMECA product-
line.
-
STAR Konferenz Deutschland 2007, 6-7. November 2007
Conference, Hilton Hotel Nuremberg, Nuremberg, Germany, November 6, 2007
The programme will include presentations
on CD-adapco key technologies and future developments,
helping you stay up to date with our strategy. Add in the
popular technical workshops, an exhibition of our most
closely integrated partners, an audience of CAE experts and
our STAR Konferenz will be bigger and better than ever,
with a packed agenda of User presentations.
-
ERCOFTAC Autumn Festival 2007
Program, Belgian Royal Academy, Brussels, Belgium, October 29, 2007
The ERCOFTAC Autumn Festival will be held in the august
surroundings of the Belgian Royal Academy from 29th to 31st
October. The first day - Modeling & Simulation: Significant
Achievements & Hard Lessons - is devoted to key issues in
applied fluid dynamics affecting industry. The second day
is devoted to the da Vinci Student Competition and
prestigious prize award as well as the Science Forum. The
ERCOFTAC Committee meetings will be held on the third day
-
ESSS South American ANSYS Users Conference
Conference, Hotel Caesar Business Faria Lima, São Paulo, Brazil, October 25, 2007
A must-attend event for professionals who want to know the
innovations in Computational Fluid Dynamics and Structural
Analysis. The ESSS South American ANSYS Users Conference
join users of ANSYS, ICEM CFD, CFX and Fluent of all South
America. It is a great opportunity to see the benefits of
computational aided engineering solutions. Come to the
conference and learn how ANSYS, Inc. solutions will help
you gain a competitive edge.
-
Quality and Reliability of Large-Eddy Simulations
Workshop, Leuven, Belgium, October 24, 2007
The focus of QLES will be on issues related to assessing,
assuring, and predicting the quality of LES. The tendency
to apply LES-methodologies to turbulent flow problems of
significant complexity, such as arise in various
applications in technology and in many natural flows puts
this workshop in its timely context.
-
Quality and Reliability of Large-Eddy Simulations
Conference, Leuven, Belgium, October 24, 2007
The focus of QLES will be on issues related to assessing,
assuring, and predicting the quality of LES. The tendency
to apply LES-methodologies to turbulent flow problems of
significant complexity, such as arise in various
applications in technology and in many natural flows puts
this workshop in its timely context.
-
Advanced Research Workshop "Fire Computer Modeling"
Workshop, University of Cantabria, Santander, Spain, October 19, 2007
The goal of the Workshop is to bring together numerical and
experimental practitioners in fire dynamics, and foster
discussion and exchange of knowledge about the current
state of fire modeling. Experts in the field are called
upon to present their research, applications and case
studies to a worldwide audience. The programme will cover
both theoretical and practical aspect.
-
Computational Fluid Dynamics Training at Pune
Course, 'Panchsheel', 42/16, Income Tax Office Lane, Erandwana., Pune, India, October 19, 2007
Program to develop expertise in Fluid Dynamics, Application
of Computational Fluid Dynamics.
-
Inclusive Analysis day October 17th 2007
Seminar, Innovation Technology centre Brunel Way, Rotherham, United Kingdom, October 17, 2007
The focus is Pre processing and volume generation, which
will be of interest to anyone involved in FEA or CFD
applications. With a number of speakers from industry, plus
quick fire presentations of the latest technologies. The
day will be informative with a good level of Knowledge
transfer. A Networking lunch will ensure you also make some
useful contacts.
The day is free but places are limited.
-
6th FKFS Conference: Progress in Vehicle Aerodynamics and Thermal Management
Conference, Paffenwaldring 7, Stuttgart, Germany, October 9, 2007
The conference is an ideal forum in which to present and
discuss advances in engineering technology, i.e. wind
tunnel techniques, external
and unsteady aerodynamics, aeroacoustics, thermal
management and engine cooling.
-
DANSIS Seminar - New Trends in CFD
Seminar, DTU, Auditorium 31, Building 306, Kgs. Lyngby, Copenhagen, Denmark, October 3, 2007
The seminar will give an overview of new advances and
development in both commercial, open source and university
CFD-codes and allow the participant to interact with the
software developers.
-
CFD as an Aid to In-flight Icing Certification
Course, Universidad de Sevilla, Seville, Spain, September 28, 2007
This short but
to-the-point course illustrates the state-of-the-art in CFD
icing simulation and its application to the certification
process. It should be of direct and indirect value to all
personnel involved in in-flight icing.
-
PLM Road Map 2007
Conference, The Inn at St. John's, Plymouth, United States, September 19, 2007
PLM Road Map 2007 is a strategic conference focused on the
critical tradeoffs that shape product development.
-
The Sixth International Workshop on Unstructured Mesh Numerical Modelling of Coastal, Shelf & Ocean Flows
Workshop, Imperial College London, United Kingdom, September 19, 2007
The unstructured workshop presents an annual opportunity for
the developers and users of unstructured mesh models of
environmental flows to exchange results and views related to
all aspects of this field.
-
Symposium on Numerical Analysis of Fluid Flow and Heat Transfer
Conference, Hotel Marbella (Agios Ioannis Peristeron), Corfu, Greece, September 16, 2007
The aim of ICNAAM 2007 is to bring together leading
scientists of the international Numerical and Applied
Mathematics community and to attract original research
papers of very high quality. Topics to be covered include
all the research areas of Numerical Analysis and
Computational Mathematics and all the research areas of
Applied and Industrial Mathematics.
-
IUTAM Symposium on Advances in Micro- and Nano-fluidics
Conference, Dresden, Germany, September 6, 2007
The subject of the symposium is to review the state-of-art
of numerical and theoretical
modeling of flows at micro- and nanometer scales.
-
International Summer School: Direct Numerical Simulations (D.N.S) of Reacting and Two-Phase Flows
Course, MB building, HFI, Technical University, Berlin, Germany, September 2, 2007
This is a rare opportunity to hear from instructors who
are leading figures and all experts in DNS, numerical
methods and associated physical models, about the latest
developments and application of DNS in reacting and two-
phase flows, as well as to gain experience of a variety of
applicable areas.
It will be 5 days of full teaching and 2 days of get-
together, with the aim to foster exchange and
communication between the participants during and after
the Summer School.
-
Computational Electromagnetics: Basics & Applications
Workshop, Dept. of Electrical & Electronics Engg. S.V.University College, Tirupati, India, August 29, 2007
The workshop is aimed at students and faculty who are
working in the field of electromagnetics or are planning to
start their research in this field. Workshop will also be
very helpful in training engineers/scientists from R&D
organization working in the field of Radars, Radar Cross
Sections, Antennas, Wave Guides, and other electromagnetic
applications using computational tools.
-
Diploma in Advanced CFD Analysis (DACFD)
Program, Flat No.6, Bharati Apartment, 26/1, Wakedewadi, Shivajinagar,, Pune, India, August 16, 2007
Centre for Computational Technologies(CCTech) offers
professional training in highly specialized area of CFD
Analysis (DACFD).
-
European Postgraduate Fluid Dynamics Conference 2007
Conference, University of Birmingham, Birmingham, United Kingdom, August 8, 2007
The EPFDC 2007 is a conference organised by, and aimed
specifically at, postgraduate researchers in the field of
fluid dynamics. The principal aim of the conference is to
provide a forum in which postgraduate students in fluid
dynamics can present and discuss their research with a
group of their peers.
-
Realistic Simulation with SIMULIA Multiphysics Solutions
Online Event, August 2, 2007
SIMULIA provides a platform for coupling multiphysics
applications as well as fully-integrated multiphysics
solutions with Abaqus FEA that are targeted at specific
applications in multiple industries. Join us for a free
one-hour webinar to learn how you can get closer to
simulating real-world behavior using the latest
capabilities from SIMULIA.
-
Realistic Simulation with SIMULIA Multiphysics Solutions
Online Event, July 31, 2007
SIMULIA provides a platform for coupling multiphysics
applications as well as fully-integrated multiphysics
solutions with Abaqus FEA that are targeted at specific
applications in multiple industries. Join us for a free
one-hour webinar to learn how you can get closer to
simulating real-world behavior using the latest
capabilities from SIMULIA.
-
Webinar: Optimizing Chemical Reactor Performance with Computer Simulation
Online Event, July 25, 2007
This webinar introduces the economics of reactor design and
the relevant elements of reaction engineering simulations,
addressing concerns such as: detailed chemistry, competing
and parallel reactions, reactions with varying time and
length scales, accounting for the effect of fluid mechanics
in general, and turbulence-chemistry interaction in
particular.
-
CFD Seminar for Semiconductor Industry at Semicon West 2007
Seminar, West Mezzanine, Moscone Center, Room 276, San Francisco, United States, July 18, 2007
ESI Group is pleased to invite you for a FREE Seminar
on "Software Modeling Solutions for Semiconductor Equipment
and Processes".
-
Webinar Series, Part 1: Solutions for Battery Modeling and IGBT Inverter Modeling
Online Event, July 14, 2007
Integrating high fidelity electromagnetic and
electromechanical physics based models into a system level
simulation, can assist the engineers in optimizing drive
performance as well as controlling harmonics and mitigating
conducted and radiated EMI/EMC. This webinar series will
review the methodology employed to achieve this integration.
-
Webinar: Low-Cost Optimization of Flue Gas Desulfurization Equipment
Online Event, July 10, 2007
With the high expense of compliance for SOx limits in the
Clean Air Interstate Rule (CAIR), operators are looking for
low cost methods to get the most out of their existing
pollution control equipment. This webinar will present some
of the basics of scrubber and duct fluid mechanics, mass and
heat transfer, as well as methods for assuring uniform flow
distribution in ducts and flue gas clean-up equipment.
-
2nd International Symposium on: Advanced Computational Methods and Applications for Heat Exchanger Design
Conference, Vancouver, Canada, July 8, 2007
The symposium will cover all aspects of numerical
simulation as applied to heat exchangers.
Areas of interest include but are not limited to:
free-stream turbulence and transition, computer limitations
and algorithm optimization, conjugate heat transfer and
enhanced surfaces, electronics cooling and micro-heat
exchangers, fluid-structural interactions, fouling, meshing
complex geometries, phase change and multi-phase flow,
transient and periodic flows, user-friendly software.
-
ANSYS r12 InfoDays
Workshop, Largo Augusto 7 , Milano, Italy, July 8, 2007
Meet the capabilities of the new ANSYS 12 release.
-
EACC - European Automotive CFD Conference by Ansys
Conference, Congress Center Messe Frankfurt, Frankfurt, Germany, July 5, 2007
This unique, biennial event is the one-stop Automotive CFD
conference for Road, Rail, Racetrack and Off-Highway Vehicle
Engineering.
-
2nd European Conference on Aerospace Sciences
Conference, ULB, Avenue Franklin D. Roosevelt 50, 1050 Bruxelles, Belgium, July 2, 2007
The conference will highlight advances in key aerospace
sciences in 5 parallel symposia under a European co-
organisation. Papers are solicited on Research and
Development, modelling, simulation and testing.
-
UK FIELDVIEW 12 Seminar
Seminar, Reading, United Kingdom, June 26, 2007
Applied Computing & Engineering will demonstrate the new
FIELDVIEW 12 software, review the current FIELDVIEW product
suite and introduce you to new tools that will change the
way you think about presenting your CFD and FEA results.
-
UK FIELDVIEW 12 Seminar
Seminar, Manchester, United Kingdom, June 21, 2007
Applied Computing & Engineering will demonstrate the new
FIELDVIEW 12 software, review the current FIELDVIEW product
suite and introduce you to new tools that will change the
way you think about presenting your CFD and FEA results.
-
Second Symposium on Hybrid RANS-LES Methods
Conference, Chandris Dassia Hotel, Corfu, Greece, June 17, 2007
The main topics of the Symposium include:
* Unsteady RANS, LES versus DES
* Improved DES
* Hybrid URANS-LES
* Embedded LES
* DES-related numerical issues
* Performance of the new SAS models
* Industrial applications of DES
* Commercial CFD software exhibition
-
Fourth M.I.T. Conference on Computational Fluid and Solid Mechanics -- Focus FSI
Conference, Hyatt Regency Cambridge Hotel, Cambridge, United States, June 13, 2007
The Conference Series was created by Prof. K.J. Bathe,
M.I.T. The First Conference was held in 2001. The aim of
the Conferences is to bring together researchers and
practitioners from around the world to assess the latest
frontiers of high performance computing and to set important
directions for further research and development. Emphasis is
given on the
interchange of experiences in the field between Academia and
Industry and on exposing young researchers to the exciting
state of the art.
-
GROUND TESTING FOR HYPERSONIC FLIGHT AND ATMOSPHERIC ENTRY APPLICATIONS (VKI/NIA - US)
Conference, NIA, United States, June 11, 2007
The present status of ground test facilities and
instrumentation for simulation of hypersonic flight,
propulsion, and atmospheric entry will be reviewed with
respect to current and proposed international vehicle
development programs.
-
Second OpenFOAM Workshop in Zagreb, Croatia 7-9/Jun/2007
Workshop, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, Croatia, June 7, 2007
Wikki Ltd. and University of Zagreb, Croatia announce the
Second OpenFOAM Workshopin Zagreb, 7-9/Jun/2007. Main topics
include: Turbomachinery simulations with OpenFOAM,
Fluid-structure interaction, OpenFOAM for internal
combustion Engines and OpenFOAM on Windows and Mac OS X.
-
TURBULENT COMBUSTION
Conference, von Karman Institute, Chaussee de Waterloo 72, 1640 Rhode-St-Genese, Belgium, June 4, 2007
The objective of this Lecture Series is to present a
state-of-the-art review of on-going activities in
turbulent combustion and to outline current research
directions.
-
Parallel CFD 2007
Conference, Sheraton Voyager Hotel, Antalya, Turkey, May 21, 2007
International Conference on Parallel Computational Fluid
Dynamics
-
CFD OF MULTIFLUID FLOWS
Conference, von Karman Institute, Chaussee de Waterloo 72, 1640 Rhode-St-Genese, Belgium, May 21, 2007
The purpose of the course is to provide state-of-the-art
information on physical modeling and numerical simulation
of multifluid flows.
-
Elmer basic and advanced courses
Course, Keilarana 14, Espoo, Finland, May 18, 2007
Two one day courses on the Elmer finite element software.
-
Fluid Structure Interaction 2007
Conference, Wessex Institute of Technology, The New Forest, United Kingdom, May 14, 2007
The conference will be of interest to mechanical and
structural engineers, offshore engineers, earthquake
engineers, naval engineers and any other experts involved
in topics related to fluid structure interaction and those
specialising in moving boundary problems.
-
Developing a Design/Simulation Framework
Conference, Georgia Tech's Global Learning Center, Atlanta, United States, May 9, 2007
Join industry analysts from CPDA and leading-edge users and
practitioners for a one-day event that explores in depth the
latest thinking on the critical issues facing simulation.
-
ADVANCES IN LAMINAR-TURBULENT TRANSITION MODELLING (RTO)
Conference, von Karman Institute, Chaussee de Waterloo 72, 1640 Rhode-St-Genese, Belgium, May 7, 2007
The purpose is now to revisit the subject in view of the
latest advances made, specially taking into account the
increased capabilities in numerical simulations and in non-
intrusive optical measurement techniques.
-
5th Joint FZD & ANSYS Workshop & Short Course on Multiphase Flows: "Simulation, Experiment and Application"
Workshop, Park Plaza Hotel, Dresden, Germany, April 25, 2007
The short course on multiphase flows is being organized
jointly by the Forschungszentrum Dresden-Rossendorf (FZD),
ANSYS Germany (CFX) and Fluent Deutschland (ANSYS Fluent).
It is supported by the German Alliance for Competence in
Nuclear Technology.
-
Turbulence LES Seminar
Seminar, La Maison de la Recherche - 54, rue de Varenne - 7ème, Paris 75007, France, April 24, 2007
The aim of this seminar is an overview of Turbulence Models
and
the applications for Industrials. Learn about Large Eddy
Simulation with
FLUENT and ANSYS CFX and their advantages in this half-day
seminar.
-
FILM COOLING SCIENCE AND TECHNOLOGY FOR GAS TURBINES: STATE-OF-THE-ART EXPERIMENTAL AND COMPUTATIONAL
Conference, von Karman Institute, Chaussee de Waterloo 72, 1640 Rhode-St-Genese, Belgium, April 16, 2007
The LS will provide a comprehensive and complete single
source for understanding film cooling and a basis for
future film technology advances.
-
European Combustion Meeting (ECM2007)
Conference, Mediterranean Agronomic Institute of Chania, Chania, Greece, April 11, 2007
The THIRD EUROPEAN COMBUSTION MEETING (ECM2007) will be
held in Chania, Crete during 11-13 April 2007 and will be
organized by the Greek Section of the Combustion Institute
under the auspices of the Federation of the European
Sections of the Combustion Institute. The meeting aims to
provide a forum for the presentation and discussion of
current research activities in the field of combustion and
to promote European co-operation in combustion research
and development.
-
EFD for the CAD User
Online Event, April 3, 2007
This 20 minute technical webinar is designed to assist
mechanical engineers concerned with fluid flow or heat
transfer issues understand how EFD (an embedded CFD analysis
tool) can help optimise designs.
-
Computational Fluid Dynamics Research and Industrial Application
Workshop, Sardar Patel College of Engg,Bhavan’s Campus, Munshi Nagar, Andheri West Mumbai, India, March 24, 2007
This course is valuable for students, faculty or industry
personnel of Mechanical, Chemical, Civil and Aerospace
Engineering who want to make career in growing areas like
CFD or want to teach CFD as an undergraduate and
postgraduate level course. Participants will benefit by
learning the basics of Fluid Mechanics and CFD from
distinguished IIT Bombay faculty. Interaction with Zeus
Numerix engineers will give a feel of solution of industrial
problems.
-
High-Performance Computing with ANSYS Solutions and Windows Compute Cluster Server 2003
Online Event, March 21, 2007
Microsoft and ANSYS, Inc. are making strides in high-
performance computing (HPC). Microsoft Computer Cluster
Server 2003 is fully integrated within the ANSYS Workbench,
thereby allowing ANSYS users to submit directly to a
Windows cluster from their desktop through the Microsoft
Job Scheduler. This Webcast presents how the connection
between ANSYS and Windows Compute Cluster Server can help
users take advantage of high-performance computing.
-
WIND TURBINE AERODYNAMICS: A STATE-OF-THE-ART
Conference, von Karman Institute, Chaussee de Waterloo 72, 1640 Rhode-St-Genese, Belgium, March 19, 2007
The objective of this Lecture Series is to review the
state-of-the-art in current wind turbine technologies and
set the perspectives for new potentials in terms of R&D.
-
STAR European Conference 2007
Conference, Novotel London West, London, United Kingdom, March 19, 2007
Formerly the CD-adapco/STAR-CD User Group, the conference
now includes popular technical workshops, demos, an
exhibition of our most closely integrated software and
hardware partners, an audience of CAE experts as well as
User presentations and CD-adapco key technologies and future
developments.
If you register for the conference by January 26, 2007 you
will be entered into our prize draw to win an
I.TECH Virtual Keyboard - a real 22nd Century gadget!
-
Quality & Reliability of CFD Simulations III: Quantifying and Reducing Uncertainty
Seminar, East Midlands Conference Centre, University of Nottingham, Nottingham, United Kingdom, March 14, 2007
This seminar is jointly promoted by NAFEMS & ERCOFTAC and
examines the quantification and reduction of uncertainty
for industrial and environmental CFD applications
-
ADVANCES IN PROPULSION TECHNOLOGY FOR HIGH-SPEED AIRCRAFT (RTO-VKI)
Conference, von Karman Institute, Chaussee de Waterloo 72, 1640 Rhode-St-Genese, Belgium, March 12, 2007
This VKI/RTO lecture series reviews the current state of
the art and challenges in high speed propulsion for both
airplanes and space launchers.
-
EFD for the CAD User
Online Event, March 6, 2007
This 20 minute technical webinar is designed to assist
mechanical engineers concerned with fluid flow or heat
transfer issues understand how EFD (an embedded CFD analysis
tool) can help optimise designs.
-
PRODUCTION, TRANSPORT AND APPLICATIONS OF NANO PARTICLES
Conference, von Karman Institute, Chaussee de Waterloo 72, 1640 Rhode-St-Genese, Belgium, February 26, 2007
This LS intends to focus on technical aspects concerning
the production and transport of nano-powders.
-
Six Degrees of Freedom Modelling and Simulation of Aerospace vehicles.
Workshop, CDAC, Knowledge Park, Old Madras Road, Byappanahalli, Banglore, India, February 8, 2007
As Modelling and Simulation (M&S) is penetrating the
aerospace sciences at all levels, this two days course will
introduce you to difficult subject of modelling aerospace
vehicles in six degrees of freedom (6 DOF).
-
EFD for the CAD User
Online Event, February 6, 2007
This 20 minute technical webinar is designed to assist
mechanical engineers concerned with fluid flow or heat
transfer issues understand how EFD (an embedded CFD analysis
tool) can help optimise designs.
-
TIP TIMING AND TIP CLEARANCE PROBLEMS IN TURBOMACHINES
Conference, von Karman Institute, Chaussee de Waterloo 72, 1640 Rhode-St-Genese, Belgium, February 5, 2007
During this Lecture Series, world experts will present the
fundamentals of sensor technology and measurement chain,
and examples of applications in fans, compressors and
turbines.
-
INTRODUCTION TO CFD
Conference, von Karman Institute, Chaussee de Waterloo 72, 1640 Rhode-St-Genese, Belgium, January 29, 2007
This course is intended to provide the basic information
required to initiate research or applications in most of
the important domains of computational fluid dynamics.
-
Quality and Reliability of Large-Eddy Simulations II - QLES2009
Workshop, Piazza dei Cavalieri, Pisa, Italy, January 1, 2007
The focus of QLES2009 will be on issues related to
assessing, assuring, and predicting the quality of LES. The
QLES2009 workshop invites original contributions which
enhance the knowledge on error sources and their interaction
in LES, and may lead to criteria for the prediction and
optimization of simulation quality. The QLES2009 workshop is
the second workshop in the QLES series. Its predecessor,
QLES2007, was organized in 2007 in Leuven, Belgium.
-
Virtual Tow Tank - Computational Simulation Training for Naval Architects & Marine Engineers
Course, San Diego, United States, January 1, 2007
The aim of this course is to teach the techniques needed to
conduct accurate and efficient marine simulations using
computational fluid dynamics. The course is structured as a
combination of lectures, demonstrations and workshops
(tutorials). Best practices for meshing and analysis of
stationary and multi-degree-of-freedom (DOF) free-surface
applications are emphasized and demonstrated.
-
Fifth International Conference on CFD in the Process Industires
Conference, Melbourne, Australia, December 13, 2006
The conference continues a successful series of meetings
aimed at promoting and advancing the application of CFD in
the minerals and process industries where technologies
often involve challenging aspects such as multiphase flow,
combustion, phase change, non-Newtonian flow, etc.
-
Webinar: Powerful Flow Simulation for Oil & Gas Separation Technology
United Kingdom, December 13, 2006
This webinar will focus on the competitive advantage that
can be gained through the application of Computational Fluid
Dynamics (CFD) to separator design and operation, and will
provide a range of compelling examples that clearly
illustrate demonstrate how flow simulation can reduce cost
and increase the efficiency of separation processes,
including retrofitting existing separators and preventing
damage due to sloshing loads.
-
Engineering Simulation Solutions Seminar for the Oil & Gas Industry
Seminar, Houston Marriott West Loop at the Galleria, Houston, United States, December 12, 2006
Accelerate Innovation and Time to Market through Enhanced
Engineering
Simulation at the Engineering Simulation Solutions Seminar
for the Oil & Gas
Industry in Houston, TX on Tuesday, December 12, 2006.
-
Introduction to FLUENT Training
Course, Fluent Inc., Ann Arbor, United States, December 11, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Introduction to FLUENT Training
Course, Santa Clara, United States, December 11, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Introduction to Icepak Training by Fluent
Course, Fluent Inc., Lebanon, United States, December 11, 2006
New users of Icepak software should register for the three-
day introductory training course.
-
Workshop & Training Programme on Computational Fluid Dynamics
Workshop, NPSF Building, Centre for Development of Advanced Computing, Pune, India, December 11, 2006
To foster the usage and generate expertise in Computational
Fluid Dynamics(CFD) area, Centre for Development of
Advanced
Computing(C-DAC),Pune is organizing a 5 days intensive
training programme on CFD simulation during
December 11-15,2006.
-
Introduction to Airpak Training by Fluent
Course, Fluent Inc., Lebanon, United States, December 6, 2006
The training course is a combination of lectures with
discussion and hands-on exercises to introduce the student
to the basics of using Airpak, to familiarize the student
with the user-interface, and also to begin a mutually
beneficial partnership.
-
CFD Seminar
Seminar, ESI UK, MWB, The Oxford Science Park, Oxford, United Kingdom, December 5, 2006
The day will include an overview of ESI Group's CFD Ace
and
CADalyzer, simulation of Fuel Cells, Multiphysics
Simulation of MEMS Applications, PLasma and Chemical
Vapour as well as CFD simulation of Semi-Conductor Process
and Design.
-
Introduction to Icepak Training by Fluent
Course, Santa Clara, United States, December 4, 2006
New users of Icepak software should register for the three-
day introductory training course.
-
Solving Dynamic Mesh Problems with FLUENT V6
Course, Fluent Inc., Ann Arbor, United States, November 30, 2006
This training course, offered in Fluent's Ann Arbor
office, is designed for existing users of FLUENT.
-
Fluent International Oil & Gas CFD Conference (IOCC)
Conference, HQS Wellington, London, United Kingdom, November 30, 2006
The IOCC is unique. It brings together the Oil & Gas
Computational Fluid Dynamics (CFD) Community across Europe,
the Middle East and North American and Asian practitioners
also, to one central location. The focal points of the
conference are leading edge applied CFD presentations and
best practice sessions. In addition, a complementary
Partner
Pavilion as well as other networking and social events
provide a valuable and exciting CFD experience.
-
Analysis of Subsonic Fluid-Structure Interaction and Supersonic Store Separation Using FLUENT and Tecplot
Online Event, November 30, 2006
Tecplot Inc. and Fluent Inc., a wholly owned subsidiary of
ANSYS, Inc., offer this webinar, Thursday, Nov. 30, to
demonstrate the combined power of their respective
software solutions in tackling fluid-structure interaction
(FSI) problems and transient flow problems.
-
Fluent's Fluid Mechanics and CFD Review Course
Course, Fluent Inc., Lebanon, United States, November 29, 2006
This two and a half-day course is intended for those users
who are new to CFD and who need an introduction (or re-
introduction) to fluid mechanics, heat transfer and
computational fluid dynamics.
|
