-
Introduction to Measurement Techniques
Course, Chaussee de Waterloo 72, B-1640 Rhode-St-Genese, Belgium, October 10, 2005
The objective of this course is to provide young engineers with a broad overview of traditional and advanced measurement techniques applicable to fluid dynamics.
-
Introduction to FLUENT
Course, Houston, United States, October 10, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Austin, United States, October 10, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Integrating the FlowLab Virtual Fluids Laboratory into Engineering Curriculum
Online Event, October 6, 2005
This webinar will inform the audience about the core
capabilities of Fluent’s virtual fluids laboratory, FlowLab.
Case studies will be reviewed to highlight how this student-
friendly CFD tool has been used at the University of Iowa,
at Penn State University, and by other North American
universities.
-
Forum FLUENT 2005
User Conference, Madrid, Spain, October 6, 2005
-
TCN CAE 2005
Conference, Lecce, Lecce, Italy, October 5, 2005
International Conference on CAE and Computational Technologies.
The TCN-CAE 2005 event is an end-user-oriented conference in the fields of industrial design innovation and production process optimization. Researchers, experts from industry, and recognized speakers will highlight value and benefits arising from the application of the most-advanced CAE technologies.
-
EUA4X Project Event 09 - EUA4X Annual Conference
Conference, Convento di San Domenico, Lecce, Italy, October 5, 2005
The aim of the EUA4X 2005 Annual Conference is to provide a forum for the discussion of the latest developments of computational technologies for industry and to broaden their application to many other computation-oriented areas. The EUA4X 2005 Annual Conference will be hosted by the International Conference on CAE and Computational Technologies for Industry TCN CAE 2005.
-
Introduction to FLUENT
Course, Lebanon, United States, October 3, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
EUA4X Project Event 08 - Training Course: State-of-the-art in Numerical Grid Generation: From Theory to Practice
Course, University of Lecce / Convento di San Domenico, Lecce, Italy, October 3, 2005
The basic aim of the course is to provide a state of the art in numerical grid generation. Ranging from theoretical to application approaches the method overview deals with effective solutions of domain discretization problems occuring in computational field simulations.
20 EU fellowships are offered to young participants to attend the conference.
-
Introductory course ICEM CFD/AI*Env
Course, Oslo, Norway, October 3, 2005
Introductory course: ICEM CFD/AI*Env advanced meshing for CFD and FEA
-
8th Numerical Towing Tank Symposium
Conference, seaside hotel, Varna, Bulgaria, October 2, 2005
Nonlinear flows around marine structures (LES, RANSE, Euler with or w/o free surface)
Free-surface flows around marine structures (3-d seakeeping, free-surface viscous flows)
Related topics (validation experiments, numerical techniques, grid generation, etc)
-
Solving Ocean Engineering Problems Using Computational Fluid Dynamics
Online Event, September 29, 2005
During this one hour online session we will demonstrate how
flow modeling software can be used to complement your
organization's existing methods and tools in order to meet
the demanding needs of naval/ocean engineering applications.
-
Shape Optimization of CFD Applications
Course, Fluent Training Center, Ann Arbor, United States, September 27, 2005
This course, which will be held, Tuesday, Sept. 27, is designed to teach FLUENT users how to conduct shape optimization of CFD applications.
-
Gain the Competitive Edge in Motorsports with CFD Simulation
Online Event, September 27, 2005
This free webinar is intended to highlight relevant advanced modeling in the areas of fan design, realistic fan-system interactions, more realistic fan modeling approaches and discussion of possible ways to predict fan noise.
-
Introduction to FLUENT
Course, Santa Clara, United States, September 26, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Fluent Inc., Lebanon, United States, September 26, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Introduction to Icepak
Course, Lebanon, United States, September 26, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
iTi Conference on Turbulence 2005
Conference, Bad Zwischenahn, Germany, September 25, 2005
The objectives of this conference are comprising basic research as well as research related to application. Therefore, both engineers and physicists working in the field of turbulence are invited to join the conference. The invited speakers are presenting their contributions in fields of experimental, numerical, and theoretical research. Discussed topics are, for example, thermal convection, boundary layer at large Reynolds numbers, isotropic turbulence, numerical simulations, and related subjects ...
-
Fluent UK User Group Meeting 2005
User Conference, Hilton Hotel, Warwick, United Kingdom, September 22, 2005
Fluent Europe Limited warmly invites its commercial software users to the Fluent 2005 UK User Group Meeting, which takes place on 22 & 23 September at the Hilton Hotel in Warwick.
-
Performance-Driven Advanced Cooling Systems: A Primer for Thermal Solution Analysts and Designers
Online Event, September 22, 2005
This free webinar is intended to highlight relevant advanced modeling in the areas of fan design, realistic fan-system interactions, more realistic fan modeling approaches and discussion of possible ways to predict fan noise.
-
Fluid Mechanics and CFD Review Course by Fluent
Course, Fluent Inc., Lebanon, United States, September 21, 2005
This two and a half-day course is intended for those users who are new to CFD and who need an introduction (or re- introduction) to fluid mechanics, heat transfer and computational fluid dynamics. The goal is to make you more successful at CFD by having a more thorough knowledge of the underlying physics and numerical techniques in our software.
-
Introduction to FLUENT
Course, Fluent Inc., Ann Arbor, United States, September 19, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Fluent Inc., Santa Clara, United States, September 19, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Fluent Scandinavia User Group Meeting 2005
User Conference, Scandic Crown Hotel , Polhemsplatsen 3, Gothenburg, Sweden, September 19, 2005
Welcome to the Fluent Sweden Scandinavian User Group Meeting 2005, which take place on the 19-20 of September at the Scandic Crown, Polhemsplatsen in Gothenburg.
-
Advanced Thermal Modeling Course
Course, Icepak, Austin, United States, September 15, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Fluent Presents: Ask the Experts Online Forum: User-Defined Functions
Online Event, September 14, 2005
Our panel of flow modeling experts will be available via an online forum to answer your questions concerning user-defined functions (UDFs), Wednesday, September 14 from 2-3 p.m.
-
Quality and Reliability of CFD Simulations II: Industrial Challenges
Seminar, Senate Chamber, University of Nottingham, Nottingham, United Kingdom, September 13, 2005
This seminar brings together users of CFD to examine issues of accuracy, reliability and trust in the context of practical applications in engineering design, the environment, and health and safety management. The underlying theme is the useful exploitation of CFD in the face of uncertainty and complexity. The presentations will illustrate how to reduce uncertainty in CFD and how to derive most benefit from the technology, as well as raising awareness of current quality and trust initiatives.
-
Evolutionary Methods for Design, Optimisation and Control with Applications to Industrial and Societal Problems (EUROGEN 2005)
Conference, Arabella Sheraton Bogenhausen, Arabellastrasse 5, 81925 Munich, Germany, September 12, 2005
-
Introduction to FLUENT
Course, Fluent Inc., Lebanon, United States, September 12, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Airpak
Course, Fluent Inc., Lebanon, United States, September 12, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Airpak
Course, Los Angeles, United States, September 12, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Icepak
Course, Austin, United States, September 12, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Introduction to FLUENT
Course, Lebanon, United States, September 12, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Airpak
Course, Fluent Inc., Los Angeles, United States, September 12, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
14th International Meshing Roundtable
Conference, Bahia Hotel and Resort, San Diego, United States, September 11, 2005
The International Meshing Roundtable focuses on bringing together researchers and developers from academia, national labs and industry in a stimulating, open environment for the exchange of technical information related to mesh generation and general pre-processing techniques.
-
OpenFoam an Open Source code for Finite Volume Method: CFD simulations
Workshop, Chalmers Conference Center, Chalmersplatsen 1, Gothenburg, Sweden, September 7, 2005
Introduction to OpenFoam an object oriented library for Finite Volume Method.
-
SIMDI05
Conference, Chalmers Conference Center, Sweden, September 7, 2005
-
9th UK National Heat Transfer Conference
Conference, The University of Manchester, Manchester, United Kingdom, September 5, 2005
The scope of the conference spans all aspects of heat transfer and related mass transfer, including applications such as bio-systems, gas turbines and i.c. engines, materials processing, micro-systems, power and process engineering.
-
Free Workshop Seminar: Morpher Based Shape Optimization for CFD Applications
Seminar, The Westin Southfield Detroit, 1500 Town Center, Southfield, United States, August 25, 2005
Join Fluent, Detroit Engineered Products, Inc. and Engineous Software for a FREE WORKSHOP SEMINAR on Morpher Based Shape Optimization for CFD Applications on Thursday, August 25, 2005 from 8 am-12:30 pm.
-
Gridgen Training
Seminar, 9401 General Drive, Suite #131, Plymouth, United States, August 23, 2005
Are you interested in learning how to generate good grids in the shortest possible time? If so, you are invited to attend a free two-day Gridgen training course.
-
Introduction to FLUENT
Course, Fluent Inc., Lebanon, United States, August 22, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Airpak
Course, Dallas, United States, August 22, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Airpak
Course, Fluent Inc., Lebanon, United States, August 22, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Direct Numerical Simulation of Turbulent Flows
Conference, Greece, August 20, 2005
The aim of our Special Session is discussion of Direct Numerical Simulation of turbulent flows and flows with hydrodynamical instability. The examples of flows are turbulent convection with and without rotation, flows in channels, flows with magnetic forces, mixing layer, flows with Rayleigh-Taylor, Kelvin-Helmholtz and Richtmyer-Meshkov instability.
-
Flowmaster Free Educational Webinar on Thermal System Analysis and its Importance in Fuel Economy Predictions
Online Event, August 18, 2005
Free educational webinar, 18 August. Thermal system analysis and its importance in fuel economy predictions. Open to automotive engineers involved in this field
-
Introduction to FLUENT
Course, Fluent Inc., Ann Arbor, United States, August 15, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Fluent Inc., Santa Clara, United States, August 15, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Surface Wrapping Webinar - CD-adapco
Online Event, August 15, 2005
By popular request, we are pleased to offer you the opportunity to take part in our Surface Wrapping webinar once more on August 15, 2005 (BST 5pm, EST noon, CST 11am, MST 10am, PST 9am). The webinar will once again demonstrate our all-new surface wrapping technology.
-
Training: Reacting Flow with FLUENT/KINetics
Course, USD Computer Technical Center, 3760 Convoy Street, Suite 100, San Diego, United States, August 12, 2005
Join us for a one-day training course on Reacting Flow Modeling is designed for existing users of FLUENT. The focus of the course is using FLUENT in conjunction with Reaction Design's KINetics module, which offers a new way to model detailed gas-phase and surface chemistry within FLUENT 6.2. The training course will be held on August 12, 2005, 9:00 am-5:30 pm
-
Introduction to Microfluidics
Course, International Center for Theoretical Physics, Trieste, Italy, August 8, 2005
The purpose of this School is to provide an introduction to the flow of fluids in micro/nano channels with examples chosen from a variety of areas such as biotechnology, chemical and aerospace engineering. It is open to graduate students and beginning researchers interested in the field, with backgrounds in science and engineering.
-
Introduction to FLUENT
Course, Fluent Inc., Lebanon, United States, August 8, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Austin, United States, August 8, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Advanced Training in Fluent
Course, Fluent Inc., Lebanon, United States, August 1, 2005
This course is intended for experienced users of FLUENT v6 who are interested in more in-depth instruction on specific topics. Users may sign up for one or more days of instruction. Courses will consist of both lecture and hands-on examples.
-
CFD2005
Conference, Fairmount Newfoundland Hotel, St. John's, Canada, July 31, 2005
The 13th Annual Conference on Computational Fluid Dyanmics
-
ICEM CFD Advanced Meshing Seminar
Seminar, West Central 127, Milton Park, Didcot, United Kingdom, July 28, 2005
Registrations are invited for a free one-day seminar on the ICEM CFD mesh generation software. Anybody involved in mesh generation is welcome to register.
-
Introduction to FLUENT
Course, Fluent Inc., Ann Arbor, United States, July 25, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to FLUENT
Course, Fluent Inc., Lebanon, United States, July 25, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Airpak
Course, Fluent Inc., Lebanon, United States, July 25, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Airpak
Course, New York, United States, July 25, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Icepak
Course, Fluent Inc., Lebanon, United States, July 19, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
European Drugs and Delivery Devices (e3D Conference)
Conference, London Metropole Hilton Hotel, London, United Kingdom, July 18, 2005
The European Drugs and Delivery Devices Conference(e3d)is designed for top researchers in academia and the pharmaceutical industry. The conference is seeking Computational and experimental papers on the latest research in drug and delivery device development.
-
Introduction to Icepak
Course, Fluent Inc., Santa Clara, United States, July 18, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
ASME 1st International Symposium on: Advanced Computational Methods and Applications for Heat Exchanger Design
Conference, Westin St. Francis Hotel, San Francisco, United States, July 17, 2005
Computational methods for heat exchanger design
-
Introduction to FLUENT
Course, Fluent Inc., Lebanon, United States, July 11, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Austin, United States, July 11, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
1st Intl. Conference on Diffusion in Solids and Liquids
Conference, University of Aveiro, Aveiro, Portugal, July 6, 2005
The International Conference on Diffusion in Solids and Liquids, DSL-2005, is an unique opportunity to exchange information, present the latest results as well as assess the relevant issues on diffusion research.
-
EACC 2005: 2nd International European Automotive CFD Conference
User Conference, Congress Center, Frankfurt, Germany, June 29, 2005
After the success of the first pan EACC in Germany two years ago, the European offices of Fluent are again pleased to host the EACC in Germany at the Frankfurt Congress Center in 2005.
It promises to be the leading edge automotice CFD event in Europe in 2005 with the same mix of high quality technical and social program as that in Bingen in 2003.
-
Der Weg zum Optimum
Workshop, Germany, June 28, 2005
-
Computational Science and Engineering Conference
Conference, Turkey, June 27, 2005
-
Solving Compressible Flow Problems Webinar, Fluent, June 23
Online Event, June 23, 2005
Fluent invites you to attend its "Solving Compressible Flow Problems" online seminar on June 23, 2005 at 2 p.m. There is no cost to attend this one-hour event.
-
CFX-5 Live
Online Event, June 22, 2005
Live web demonstration of CFX-5 in the ANSYS Workbench environment at 2 pm EST.
-
CMM-2005, 16th Intl. Conference on Computer Methods in Mechanics
Conference, Czestochowa University of Technology, Czestochowa, Poland, June 21, 2005
The 16th International Conference on Computer Methods in
Mechanics CMM-2005 continues the 32-year tradition of the
Polish Conferences on Computer Methods in Mechanics. The
Conferences started in 1973 and took place every second
year. The main idea of these Conferences is still universal
- to provide a forum for presentation and discussion of new
ideas regarding with the theoretical background and
applications of computational mechanics.
-
EPSRC Summer School in Industrial CFD
Course, School of Civil Engineering, University of Nottingham, Nottingham, United Kingdom, June 20, 2005
-
Int. AVL - AST User Meeting 2005
User Conference, Hotel Novapark, Graz, Austria, June 13, 2005
The Advanced Simulation Technologies User Meeting 2005 will take place in Graz on the 13th and 14th June 2005. Make a note in your diary now!
-
9th International Conference on Numerical Grid Generation
Conference, Fairmont Hotel, San Jose, United States, June 11, 2005
This international interdisciplinary conference provides a joint forum where mathematicians, scientists, and engineers from academia, industry, and federal laboratories can communicate (exchange/assimilate) research ideas, new algorithmic and software developments, and applications involving grid generation strategies pertinent to a wide range of practical problems arising in computational field simulation.
-
Short Course on Particle Image Velocimetry
Course, Faculty of Engineering, Ancona, Italy, June 10, 2005
The one day tutorial Course intends to provide the fundamentals of the Particle Image Velocimetry (PIV) technique and to offer hands-on experience on the most recent instrumentation.
CONTENTS
The Program includes:
- an introductory lecture on PIV by Prof. M.L.Riethmuller from von Karman Institute, Belgium;
- Hands- on laboratory sessions
-
ScArt4: Science and Art 4th International Symposium
Conference, Hyatt Regency Hotel, New Brunswick, United States, June 9, 2005
ScArt4 is an interdisciplinary event of art, engineering and science confluence. It is a meeting of engineers and scientists who address how to visualize their discoveries based on computational or experimental studies, and who can create art from these visualizations, and of visual artists who utilize aspects of science/engineering (such as fluid or wave motion) in their creative expression.
-
Short Course on Laser Doppler Anemometry
Course, Faculty of Engineering, Ancona, Italy, June 9, 2005
The one day tutorial Course intends to provide the fundamentals of the Laser Doppler Anemometry (LDA) technique and to offer hands-on experience on the most recent instrumentation.
CONTENTS
The Program includes:
- an introductory lecture on LDA by Prof. F. Durst from LSTM Erlangen, Germany;
- Hands- on laboratory sessions
-
International Symposium on Physics of Fluids
Conference, Huangshan, China, June 9, 2005
The theme of this Conference is to highlight the current advances and future research and development in physics of fluids with primary focus on the connection between fundamental research and engineering applications. The Conference aims to assess the current status and to identify the future priority and directions in research and applications of computational and experimental fluid dynamics.
-
Aircraft Configurations for the New Century of Civil Aviation
Course, Belgium, June 6, 2005
This course will give a comprehensive state of the art on worldwide research and technology development during the past fifteen years aimed at the development of unconventional commercial and general aviation aircraft concepts.
-
ASME Turbo Expo 2005
Conference, Reno, United States, June 6, 2005
The largest turbomachinery conference in the world. Covers most aspects of gas turbine technology
-
CFD2005: 4th International Conference on CFD
Conference, Trondheim, Norway, June 6, 2005
This conference will focus on the application of CFD in the oil and gas industries, metal production, mineral processing, power generation, chemicals, food and other industries where technologies often involve challenging aspects such as multiphase flow, combustion, phase change, non-Newtonian flow and other multi-scale phenomena.
-
3rd Joint CFX & FZR Short Course & Workshop on Multiphase Flows
Conference, FZ Rossendorf, Institute of Safety Research, Dresden, Germany, May 31, 2005
Workshop on Multiphase Flows: "Simulation, Experiment and Application";
Keynotes: M. Ishii, M. Lopez de Bertodano, M. Sommerfeld
-
ICEM CFD Advanced Meshing Seminar
Seminar, West Central 127, Milton Park, Didcot, United Kingdom, May 26, 2005
Registrations are invited for a free one-day seminar on the ICEM CFD mesh generation software. Anybody involved in mesh generation is welcome to register.
-
CFX-5 Live
Online Event, May 25, 2005
Live web demonstration of CFX-5 in the ANSYS Workbench environment at 2 pm EST.
-
ETMM6 - ERCOFTAC Int. Conf. on Engineering Turbulence Measurement and Modelling
Conference, Sofitel Timi Ama Hotel, Villasimius (Sardinia), Italy, May 23, 2005
The Conference is the first under the aegis of ERCOFTAC but it is the direct continuation of the successful ETMM conferences, and so it represents the 6th of this series. The ETMM conferences have been held every 3 years since 1990 in a Mediterranean location.
-
Industrial Two-Phase Flow CFD
Course, Belgium, May 23, 2005
The purpose of the course is to provide state-of-the-art information on numerical simulation of multi-phase flow phenomena occurring during industrial processes.
-
Fast Forward with Fluent - Free Hands On Fluids Engineering Workshop
Workshop, Arden, Inc. 4350 Glendale-Milford Rd., Suite 180, Cincinnati, United States, May 20, 2005
Get to the core of your toughest manufacturing problems at one of three Fast Forward with Fluent workshops. The first of these free workshops will take place on May 20 in Cincinnati, OH.
-
SouthEastern Europe FLUENT Event 2005
User Conference, Porto Carras Grand Resort, Sithonia, Greece, May 11, 2005
The SouthEastern Europe FLUENT Event 2005 will take place at the Porto Carras Grand Resort, in Halkidiki, Greece, 11-13 May 2005.
All industrial & academic Fluent users are invited. The event will be also open to attendants from industry & academia who are interested in the latest developments in CFD technology.
-
Effectively Managing the CAE Process and Data Webcast
Online Event, May 11, 2005
Join Enductive, Fluent's sister company, for a webcast entitled "Effectively Managing the CAE Process and Data". The webcast will take place Thursday, May 11 at 2 p.m.
-
Flight Experiments for Hypersonic Vehicle Development
Course, Belgium, May 9, 2005
Continued interest in the development of hypersonic flight vehicles is based on their potential for lowering the cost of access to space and for revolutionizing intercontinental civil and military transport.
-
Large Eddy Simulation and Acoustic Analysis Tools for Unsteady Combustion
Course, Toulouse, France, May 9, 2005
Large Eddy Simulation of turbulent combustion is
becoming a design tool of Computational Fluid Dynamics
in many industrial domains: gas turbines, furnaces,
and piston engines. The aim of the course is to present
LES for gaseous and liquid flames. State-of-the-art CFD
codes for acoustic analysis of unstable combustion will
be presented and described. Lectures on experiments for
two-phase flow combustion will be given to demonstrate
the importance of these mechanisms in laboratory burners.
-
Simulating Fluid-Structure Interaction with ABAQUS and FLUENT
Online Event, May 5, 2005
Please join us for this online event February 15, 2005 at 4:00 p.m. EST. A second time is also offered on February 17, 2005 at 9:00 a.m. EST.
This web seminar will provide an overview of the FSI capability in ABAQUS, highlighting the following topics:
1. Evaluating your FSI applications
2. Setting up joint ABAQUS-FLUENT FSI problems
3. Co-simulation strategies
4. Examples of FSI with ABAQUS and FLUENT
-
Free 1 day ANSYS ICEMCFD AI*Environment Meshing Seminar -UK
Seminar, Gaydon, Warwickshire, United Kingdom, April 28, 2005
A seminar covering the ICEMCFD meshing tools for CFD and AI*Environment for FEA meshing.
-
Fluent Webinar: Virtual Prototyping to Improve Power Plant Emissions
Online Event, April 28, 2005
Join Fluent for a webinar on Virtual Prototyping to Improve Power Plant Emissions, April 28, at 2 p.m.
-
Blade Row Interaction in Axial Turbomachinery
Course, Belgium, April 25, 2005
The unsteadiness due to blade passing events can have important effects on the aerodynamic and heat transfer of the flow field.
-
Gridgen User Group Meeting
User Conference, Renaissance Worthington Hotel, Fort Worth, United States, April 25, 2005
Pointwise is pleased to invite our customers to participate in the Gridgen User Group Meeting 2005 to be held at the Renaissance Worthington Hotel in our hometown of Fort Worth, Texas on April 25-26, 2005. The meeting will include special Gridgen training seminars, presentations by Pointwise staff on new Gridgen developments, exhibits by our partners, and user presentations.
-
Fluent Lunch 'n Learn Series Features FloWizard, April 22
Seminar, St. John's Golf & Conference Center - 44045 Five Mile Road, Plymouth, United States, April 22, 2005
Join us for Fluent's Lunch 'n Learn Series, April 22. This cost-free seminar features a live demonstration of FloWizard - Fluent's first CFD software tool built exclusively for design engineers!
-
CFX-5 Live
Online Event, April 20, 2005
Live web demonstration of CFX-5 in the ANSYS Workbench environment at 2 pm EST.
-
PHOENICS Training Course
Course, CHAM Ltd, 40 High Street, Wimbledon Village, London, United Kingdom, April 12, 2005
3-day Introduction to PHOENICS training course
|
